Skip to main content

Using a Remote Control

The Apple Remote and the Commando Pro USB remote control can be used in various ways. These peripheral products are great tools for the locker room or boardroom presentations of coded video.

Each of these remotes can be customized in the software preferences.

Screen Shot 2015-05-21 at 3.36.46 pm

Screen Shot 2015-05-21 at 3.37.05 pm

Fig 110B Fig 110C

Each button on the remote can be assigned a movie, drawing tool, or code button hot key function. Click on the button type drop down and select from Code, Movie, or Drawing button.

Code buttons can be assigned to match hot keys in a code window. When the code window is open and in code mode, the button can be pressed on the remote and it will push that button in the code window.

Fig 110E

Movie buttons are the various playback features of the software that can be performed in a movie window using the keyboard shortcuts.

Drawing buttons will enable different drawing tools in the drawing tool bar. This is very handy when presenting in full screen.

Fig 100D

NOTE: The Commando Remote must be plugged in prior to launching the software and should not be unplugged until after the software is quit.