What's New

What’s Improved?

• Switching positions on the Scout page now takes the users to the Bio tab with the selected position players loaded

What's New

• Video Added to Player Snap Alignment Chart. You can now see video associated with the plays in the Player Snap Alignment chart.
• Updated "What's New" Modal: The modal now highlights the latest changes for Pass placement and Snap Alignment pages.

What's Improved

• Enhanced Alignment Zone Selection: Users can now select single or multiple alignment zones to watch the corresponding video plays on the Player Snap Alignment Chart.

• Punt land location data is now available in the API
   

What’s Fixed?

• Resolved a timeout error on the Player Stats page. The page now loads correctly and displays statistics as expected.
• The API now supports Blocked Touchdown as an event type.

What’s New?

• What’s new modal covering video on stats in Player Scout

What’s Improved?

• Error detail logging
• Remove outdated table headers, align filter and date handling, add "No Results" state to metric modal, adjust sidebar to tabs on the Scout page
• Toast notifications

What’s Improved?

• The 98th percentile cap on top speeds has been removed, ensuring that your video and top speed data are consistent

What’s Fixed?

• We've fixed a bug that was causing blank exports for pass map heatmaps

What’s New?

• Video link from stats on Player Profile pages!
  • View cutups of specific plays within a game that contributed towards a statistic

What’s Improved?

• New release notes page and link
• Improved styling on the video player modal
• Click X to close the Positions Modal on Scout behavior

What’s Fixed?

• Defensive backs tab not appearing when defensive backs position filtered on Scout age
• Broken video link on the Run Tendency page
• Break away speed listed as higher than a RB's top speed

What’s New?

Building on our last release statistics on Scout are now linked directly to video for WR, TE, DB, LB positions

• View cutups of the specific plays that contributed to a statistic.
• Conduct quick analysis and evaluation of a player’s performance with integrated video.

What’s New?

We’re excited to announce that statistics on Scout are now linked directly to video for OL, DL, RB, and QB positions!This enhancement allows you to:

• View cutups of the specific plays that contributed to a statistic.
• Conduct quick analysis and evaluation of a player’s performance with integrated video.

Insight 1.40.0

What did we improve?

• We've added a selection for the default widget toolbar color in the settings
• We've improved the row selection in the Data Table widget
• We've improved the ingestion process of Hawkeye tracking files, 10x faster parsing

What did we fix?

• We've fixed an issue where attributes on custom events and sequences were not being added for live matches
• We've fixed an issue where the incorrect timeline was being imported when sent from Hudl Sportscode
• We've fixed an issue where segmented videos were being imported from a Hudl Sportscode package
• We've fixed an issue where the video alignment was lost when importing an HSC package with angles that had been previously cut and reassembled
• We've fixed an issue where team and player IDs were displayed instead of their names in chart widgets when grouping by 'Attribute Value' with STS and DFL data
• We've fixed the has-not filter on events and sequences when applied to attributes without values
• We've fixed an issue in the team settings that prevented the provider association

Insight 1.39.0

What did we improve?

• We've added "Carry End" attributes to Carry events imported from Statsbomb.
• We've improved the ingestion of Statsbomb "Ball Recovery" events. This update adds a "Ball Recovery" for every pass with "Recovery" attribute.
• We've added the ability to import timeline packages directly from Hudl Sportscode via the Insight button.

What did we fix?

• We've improved the ingestion of Corner events from Statsbomb.
• We've fixed an issue for relinking missing files from a Hudl Sportscode timeline package.

Insight 1.37.1

What did we improve?

• We've added the ability to create matches without any provider data
• We've redesigned the Settings Teams tab with searchable team names, a new Source column, multi-source filtering, and sorting options
• We've redesigned the Settings Integrations tab with improved credential management, including password visibility toggle and validation

What did we fix?

• Templates now apply correctly when opening .instem files
• We've refined way time offset are sent to HSC when exporting data with Statsbomb Live

Insight 1.36.0

What did we improve?

• Your data from a Sportscode XML or Package can now inherit positional information from labels defined on the Sportscode instances, visit the Data Mapping tab in Settings
• When importing data from Sportscode XML or Package, labels without group will go under the attribute called "Hsc-xml Ungrouped" 
• We've added the ability to import and export team settings to a CSV file 

What did we fix?

• We've fixed an issue when importing Sportscode XML or Package with labels containing '.' in the group name
• We've fixed an issue where users failed to send data to a Sportscode timeline after being prompted to download a previously streamed video
•  We've fixed an issue where a download that was interrupted by closing the application would result in a corrupted file on disk

• We've improved how Insight handles projects with missing files. This prevents issues and improves performance when scanning through large folders

Insight 1.35.0

What did we improve?

• A one-time pro-tip has been added above the Rules button
• You can now use tracking providers with Statsbomb Live

What did we fix?

• We've improved the performance of sending events from Insight to Sportscode
• We've improved Sportscode XML data alignment
• We've improved Sportscode Package clip alignment
• We've fixed the Statsbomb Live data export to Sportscode being out of sync
• Any live selected match is cleared when changing from Live to Post Match

Insight 1.34.0

What did we improve?

• Your data from a Sportscode XML or Package can now inherit positional information from tracking data, visit the Data Mapping tab in Settings
• To streamline project setup, we’ve moved "Rules" to a separate, dedicated page

What did we fix?

• We’ve fixed an issue where time zone differences prevented some Hudl Statsbomb Live matches from appearing in Insight

Insight 1.33.1

What did we improve?

• You can now access Statsbomb Live event data in Insight. To set up a trial, contact support.
• We've added the simulation of the Statsbomb Live flow with events from previous matches.
• We've added the ability to import Hudl Sportscode Packages into Insight.

Insight 1.32.0

What did we fix?

• We've temporarily disabled on MacOS Sequoia and newer, the fast tracking module when using Second Spectrum tracking data in live scenario to prevent application crashes. Tracking data will still be imported, but with a few minutes delay
• We've improved the stability of the export process to HSC for streamed videos

Insight 1.31.0

What did we improve?

• We've added the option to load DVMS tracking data from the VideoSearch overlay

Insight 1.30.1

What did we improve?

• We've updated the VideoSearch overlay to save the filter selection when a video is added to a match
• We've added value labels inside pie charts to provide better data visibility and readability

What did we fix?

• We've resolved an issue that prevented the chart widget from loading data when using a language other than English
• We've added penalty attribute to shots, saves and fouls when using Statsbomb

Insight 1.29.0

What did we improve?

• We've added DVMS as a video provider to easily allow combination of DVMS videos with other event providers

What did we fix?

• We've limited the "Test Rule" button to run against the first 5 matches to reduce time to results and avoid application crash when many matches are loaded
• We've fixed an issue that cause an error when exporting to HSC using the tracking data as additional angle when using MacOS 15 Sequoia

Insight 1.28.0

What did we improve?

• We've added the ability to import Hudl Sportscode timeline XML files into Insight

What did we fix?

• We've improved reliability with the streamed video with unstable connection

Insight 1.27.0

What did we improve?

• We've implemented Hudl universal login to access the application
• We've removed the need to add Wyscout platform credentials to access Wyscout videos

Insight 1.26.0

What did we improve?

• We've added the support for HEVC (h265) streamed videos in Insight

What did we fix?

• We've fixed an issue where player's id was displayed instead of his name when using 'Attribute Value' and 'Receiver' for the axes of a bar chart
• We've fixed an issue where team's id was displayed instead of its name when using 'Attribute Value' and attributes that involve teams for the axes of a bar chart

Insight 1.25.0

What did we improve?

• We've added integration between Statsbomb Data and Wyscout Video
• We've added the support for Statsbomb OBV values as event attributes
   

Insight 1.24.2

What did we improve?

• We've improved the messaging in the video tab when videos cannot be automatically aligned

What did we fix?

• We've fixed an issue causing wyscout video to fail to load if offsets are unavailable 
• We've fixed an issue with retrieving data after joining a live Tracab game in the second period
• We've fixed an issue where black frames appeared in videos when exported from DVMS to HSC
• We've fixed an issue that was limiting the amount of visible matches during DVMS post-match analysis
  

Insight 1.23.0

What did we improve?

• You can now use Tracab tracking data when using OPTA events data for live analysis

What did we fix?

• We’ve fixed an issue causing a widget to crash when adding conditions in both the inspector panel and filter wizard

Insight 1.22.0

What did we improve?

• We've enabled all aggregator options in the chart widget together with subgrouping
• We've updated the wizard options order to match the order of the inspector filters

What did we fix?

• We've fixed an issue that prevented the Goal-view widget from visualizing post-match penalties
• We've fixed an issue that prevented making changes to the conditions when using a field widget with heatmap enabled

Insight 1.21.2

What did we improve?

• Nothing has been improved in this release

What did we fix?

• We've fixed an issue that prevented the user to import '3. Liga' games from DFL

Insight 1.21.1

What did we improve?

• We've introduced Dashboard Conditions, providing the ability to apply conditions to multiple widgets within a dashboard
• We've redesigned the dashboard header
• We've added a preloaded dashboard, 'Attacking Corners,' to assist with set piece analysis
• We've added the 'Team Order' select input for arranging the teams on the tracking widget canvas

What did we fix?

• We've fixed an issue where, in some cases, when using SkillCorner tracking data, the video and tracking widget were out of sync
• We've fixed an issue with data migration due to the recent renaming of 'My Team' to 'Primary Team

Insight 1.20.0

What did we improve?

• We've added a new rule to the Hudl library, 'Set Pieces'
• We've added the ability to choose a new field format called 'Final Third'
• We've added a flag for excluding events generated from rules as a filter condition
• We've added the ability to filter events and sequences using multiple zone pitch format (18 Zones, 9 Zones, Attacking Third Zones and Shapes)
• We've added the ability to filter events by the corresponding sequence attributes. Those attributes are defined with the prefix 'Sequence'
• We've added the ability to show the "in-swinger" and "out-swinger" passes as curved line in the field widget
• We've added the ability to choose "Average per Match" and "Average Value" in the chart widget
• We've renamed "My Team" to "Primary Team" and made widgets automatically update accordingly to the "Primary Team" choosen

What did we fix?

• We've fixed an issue that prevented the user to display attributes on the chart widget that were not part of the widget filter
• We've fixed an issue that prevented the user to search some team matches when using Wyscout data

Insight 1.19.0

What did we improve?

• We've added the ability to filter sequences by multiple names
• We've added the ability to update lead and lag times for sequence-based data tables
  

What did we fix?

• We've fixed an issue when downloading tracking data from DFL or STS of different games but with the same teams, resulting in finding wrong local data
• We've removed the attribute "Corner" from the event "Corner Awarded" when using Wyscout data
• We've fixed an issue that prevented the user from importing new Tracab tracking files
• We've fixed an issue where the event label was missing when exporting events to HSC
• We've fixed an issue with text overflow in the attributes generated section of rules
• We've fixed an issue where the destination coordinates were incorrect for events when filtered by the attribute cross when using STS
• We've fixed an issue where pressing event coordinates where incorrect
• We've fixed an issue preventing the loading of 2nd leg matches when using OPTA

Insight 1.18.1

What did we improve?

• Nothing has been improved in this release
  

What did we fix?

• We've fixed an issue with events from STS showing the wrong destination on the field widget

Insight 1.18.0

What did we improve?

• We've added two new rules to the Hudl library, 'Players Bypassed' and 'Pressing'
  

What did we fix?

• We've fixed an issue when filtering a datatable widget that would freeze the application
• We've fixed an issue with 'Download new files' button when using DFL data
• We've fixed an issue when extending sequence playlist clips when exporting to HSC resulting to original length
  

Insight 1.17.1

What did we improve?

• We've added new utility methods for the Event instance, 'getPlayerPosition' and 'getBallPosition' for usage in rules
• We've added the support for STS advanced data to improve data quality for live and post-match for MLS
• We've improved the rules to support adding custom attributes to standard events
• We've added the "height" attribute to the pass events

What did we fix?

• Nothing has been fixed in this release

Insight 1.16.2

What did we improve?

• Nothing has been improved in this release

What did we fix?

• We've fixed an issue with DFL live match listing
• We've temporarily reverted a performance fix that introduced an issue with ingestion of OPTA + SS data

Insight 1.16.1

What did we improve?

• We've added the integration of STS as a provider for live and post-match for MLS
• We've updated the widget action tooltips
• We've improved performance in recalculating data when changing rules
• We've added a list of generated attributes from the rule to the rule page
• We've added the ability to select multiple pass receivers in the field widget
• We've improved general performance of the application preventing it from freezing when querying data
• We've added sequences with only one event if it's a shot or a goal
• We've added the possibility to change and apply new rules in a live workflow
• We've added the ability to recalculate data from rule changes in a project with live data

What did we fix?

• We've fixed some missing attempted saves events when ingesting wyscout data
• We've fixed tracking widget flickering
• We've fixed rule recalculation when applying a new template
• We've fixed an issue where the chart was displaying empty row
• We've fixed an issue with exporting clips to a timeline when the playlist has multiple games
• We've fixed video sync issues when watching multiple streaming angles
• We've fixed an issue where the chart title would disappear when applying a template
• We've fixed F7 and F24 file ingestion from OPTA
• We've fixed an issue that prevented usage of dashboard after removing a video widget
• We've fixed some missing cross attributes when ingesting statsbomb data
  
• We've fixed an issue with blocked shots from STS that were pointing to the top right corner

Insight 1.15.6

What did we improve?

• Nothing has been improved in this release

What did we fix?

• We've fixed an issue with exporting to HSC using DVMS data

Insight 1.15.5

What did we improve?

• Nothing has been improved in this release

What did we fix?

• We've fixed a crash when opening a project with a missing file and no 'DownloadPath' set

Insight 1.15.4

What did we improve?

• Nothing has been improved in this release

What did we fix?

• We've fixed an issue with streaming video angle not loading when using DVMS
• We've fixed a crash when using Statsbomb events file

Insight 1.15.3 

What did we improve?

• We've improved messaging when applying templates
• We've added the ability to set widget specific lead and lag times
• We've added the integration of Hawkeye as a provider for live tracking and post-match file import
• We've added a filter for sequences to exclude data from custom rules

What did we fix?

• We've fixed an issue using Wyscout videos older than August 2020.
• We've fixed some missing Wyscout goal event attributes
• We've fixed a table being added when using the applying template shortcut
• We've fixed an issue where the order was not showing correctly on the charts
• We've fixed the test rule results exported to XML for sequences
• We've fixed some data from StatsBomb related to a missing kick-off attribute
• We've fixed filtering by event result in the live workflow
• We've fixed an issue with data files not re-downloaded for some providers
• We've fixed an issue with exporting to a timeline when converting a Wyscout video from streaming to asset
  

Insight 1.14.4

What did we fix?

• We've fixed an issue when exporting multiple clips from different games to Hudl Sportscode organiser, or sorter would use the wrong video
  

Insight 1.14.3

What did we improve?

• We've added more error messaging around custom rules
  

What did we fix?

• We've fixed an issue where unused game periods are not removed when ingesting Statsbomb data
• We've fixed sequences failing to show after there is an error in the rules during a live game
  

Insight 1.14.2

What did we improve?

• We've changed to search for local files before downloading resources to save time when adding game data
• We've enabled chart aggregators (sum, count, cumulative sum/count, and average) for all events and sequences
• We've added sequence name grouping to the chart widget
• We've added group by event result in the chart widget
• We've added the ability to define the chart label position
• We've added some missing attribute definitions
• We've made some improvements to the video alignment page
• We've added a team search on the video overlay for both League Exchange and Wyscout
• We've improved the messaging if a match fails to import

What did we fix?

• We've fixed the original video id as the stream id when exporting to Sportscode
• We've fixed an issue where the zone selector was not covering the full pitch
• We've updated an error message when there's no lineup information available when starting a live game
• We've fixed an issue where the widgets could not be dragged across the entire dashboard
• We've fixed sync indicators for the dashboard and rules
• We've fixed some issues with post-match penalties
• We've fixed an issue where the average position widget would show incorrect position in some cases

Insight 1.13.0

What did we improve?

• We've changed the Wyscout broadcast videos (and tracking) to have a more precise video and event synchronization
• We've updated the messaging when unable to download assets
• You can now select a directory to automatically relinked all missing files
• We've changed selected events to be more visible on the field widget
• We've added the outcome-based conditional colors in the field widget
• We've added the ability to filter using an outcome score
• You can now select multiple angles for a match in League Exchange

What did we fix?

• We've fixed the sequence outcome "offside pass" which was often replaced by "possession lost"
• We've fixed the events number overlay percentage
• We've fixed some inconsistencies in the Wyscout data
• We've fixed direct shots from corners to be handled as shot events

Insight 1.12.1

What did we improve?

• You can now stream video matches from League Exchange
• We've changed the data table live scroll icon
• We've added a property to change the ball size in the tracking widget
• We've added the option to change title and content color in the widgets

What did we fix?

• We've fixed a problem that could occasionally cause errors when trying to export tracking angles with voronoi enabled
• We've fixed an issue where pasting text from external sources would not match the style in Insight
• We've fixed the passing network widget to no longer crash when applying a template
• We've improved quality of the video angles generated from the tracking widget
• We've removed the ability to select an empty option for default provider preferences
• We've fixed some style issue for the chart widget
• We've added a warning message to prevent overwriting your project when applying a template
  

Insight 1.11.5

What did we fix?

• We've fixed an issue where saving a project on the rules page would fail
• We've fixed an issue in Wyscout data import

Insight 1.11.4 

What did we improve?

• We've added the ability to search an individual player for Wyscout data on the data page

Insight 1.11.3 Release

What did we improve?

• We've added new sequence filters
• You can now view the country in the competition selector, when available
• You can now stream video matches from DVMS
• You can now use multiple attributes on charts
• We've added destination coordinates to shots

What did we fix?

• We've fixed an issue with substitutions appearing incorrectly in sequences
• We've added the new seasons for OPTA competitions that started in 2023
• We've fixed the display of the average position when 'myTeam' is not properly selected
• We've fixed the sorting by the period in the Chart widget
• We've fixed an issue where the shot color was not being set in the Field widget
• We've fixed DFL out event coordinates
• We've fixed a problem with DVMS match list
  

Insight 1.10.3 Release  

What did we fix?

• We've fixed being able to use the next button on the data page when using a smaller insight window
• We've fixed incorrect or missing shot arrows on the field widget
• We've fixed being able to handle negative values for Stats Perform data

Insight 1.10.2 Release

What did we improve?

• You can now export the content of a tracking widget as an angle, for both playlists and timelines
• You can now export images for these widgets: Field, Sequences, Tracking, Graph, Goal View, Compare, Video, Average Position, Matrix and Passing Network
• We have added the possibility to connect in live to a Hudl Sportscode instance running in a different machine on the same local area network
• We've added a new overlay to send playlist/timelines to Hudl Sportscode or Studio
• We've added the possibility to retry downloading failed data
• We've made the competition list for all the supported API services searchable
• Insight is now translated also in Turkish
• We've improved the flow of sending content to Hudl Sportscode
• We've added the competition name in the Wyscout match list
• We've added sub-competitions to the match data for DFL games

What did we fix?

• We've fixed sequence filtering for End Positions
• We've fixed dashboard widget creation when applying templates
• We've fixed length of Passes not being shown on data tables
• We've fixed the preservation of columns selections inside data tables
• New attributes from rules can now be used on existing data tables
• We've improved the results when filtering by zone
• We've fixed the proportion of field content when resizing

Insight 1.9.0

What did we improve?

• You can now use video captured in Hudl Sportscode directly in Insight in Live mode
• You can now use French Ligue 1 games in Live mode with event and tracking data
• We've implemented 'fast' tracking support for Second Spectrum in Live mode
• We've moved the Library into a separate page
• We've included the xG value from Statsbomb as an attribute on Shot events
• You can now filter sequences by an area of the pitch they pass through

What did we fix?

• We've fixed an issue where passes where incorrectly set as Successful/Unsuccessful
• We've improved the ability to import rules
• We've fixed an issue with filtering events by zones in Live mode
• We've restored tooltips throughout application components

Insight 1.8.1 Release

What did we improve?

• Hudl Sportscode (12.4.23 or later) - you're now able to send fully synchronised multi-angle timelines from Insight
• Use the Wyscout API to download Serie A and La Liga broadcast tracking data
• We've updated the "Help" menu option making it easier for you to access Insight's Resource Center, get help with Scripting and more
• You can now highlight players when using the Tracking widget
• We've introduced a new Passing Network widget

What did we fix?

• We've fixed an issue with the timestamp of Hudl Sportscode session in a live context
• We've fixed an issue when closing a widget while it was loading data
• We've fixed issues with the highlight style when you hover or select table rows
• Prevent errors when application is not visible
• We've fixed minor bugs within the Wyscout and Statsbomb importers
• You can now enable Tracking widget controls when using Insight in live mode
• You can now apply the Heatmap overlay for events destinations
• We've improved the Cumulative sum aggregator when using the Chart widget

Insight 1.7.0

What did we improve?

• You're now able to stream matches from Wyscout
• You're also able to use the Statsbomb API to download games
• We've created a new 'Runs' rule, allowing you to detect player runs
• You can now filter sequences by game
• You can now view 'cumulative data' sums when using dashboard charts
• You can now group chart data by 'all opponents'
• Insight now highlights pitch zones selected on the Field widget - and you can now play related clips in a linked Video widget
• You can also view 'player runs' as an overlay when using the Field widget
• You can now use customised colours in the Comparison widget
• We've introduced new hotkeys for trim/extend clip at playlists overlay
• You can now sort matches by date within the 'Data' and 'Video' lists
• We've improved the event parsing process when using Statsbomb data
• We've improved the positioning for shots when using the Goal View widget and Wyscout data
• For widgets without a set background colour, we've introduced a default preset (which you can change in Preferences)

What did we fix?

• We've improved the quality of pass-destination coordinates when using DFL events
• We've fixed a bug causing text to overlap when comparing data bars
• You'll no longer lose selected player data when using the Comparison Widget and switching dashboards
• We've fixed a bug affecting the sequence table "saving" filter (affected when switching dashboards)
• You'll now see all data when changing event types and using charts
• Time periods are now included in charts using an X and Y axis
• Pop-up menus no longer open outside the Insight window
• Attributes containing any negative values are now treated as numbers throughout Insight
• When switching between an event clip and the full match video - you'll no longer lose the event time
• We've fixed an issue with some videos types failing to download from League Exchange

Insight 1.6.4 Release

What did we improve?

• Added support for Tracab DAT tracking with JSON metadata file format

Insight 1.6.3 Release

What did we improve?

• Added support for the Belgian Jupiler league as an Opta source
• Change to not show future games from Hudl League Exchange

What did we fix?

• Fixed an issue importing some video types from Hudl League Exchange
• Fixed a crash when using sub-groups on Sequences in Charts
  

Insight 1.6.1

What did we improve?

• You're now able to import videos from Hudl's League Exchange
• You can now group rule results by team and/or player
• New custom options are now available within the rule parameters
• You're now able to use video controls without video content
• The comparison widget now supports percentage values
• We've added additional OPTA competitions for you to access

What did we fix?

• The average position widget no longer crashes when displaying sequences
• We've corrected the lead time that's displayed when you're exporting sequences to Hudl Sportscode
• Insight now automatically relinks video files that may have been relocated on your device
• Goal events now only play once when using the video widget
• You're now able to select multiple definitions within the glossary
• Insight now recognises all Stats Perform tracking files
• We've made the radar chart view clearer when you include empty values
• We've fixed the "sort" settings on chart widget, so you're now able to switch between sort types

Insight 1.5.2 Release

What did we improve?

• Insight now allows you to extend and crop clips within the 'Playlist Overlay' when sending playlists to Hudl Sportscode
• Opta live support is available when you're connected through FTP or Bucket
• Second Spectrum live tracking support is also now available when used with Opta live
• Insight has a new widget allowing you to track the average positions of players in different sequences and periods
• You can now compare events between players
• A new 'radar' mode is available when using the comparison widget - providing a new option to visually compare data
• You can now filter by name in sequences
• You can now use custom polygons as filters for events and sequences
• You can also find custom events within sequences
• Widgets can now be copied across dashboards
• You can now configure charts to show data by period
• We've improved the names of sequences

What did we fix?

• We've fixed the import of SkillCorner files that were not recognized
• We've corrected the number of instances exported to Sportscode from Live games
• We've fixed various issues within the timeline bar
• We've fixed a bug ensuring widget sizes stay the same when switching between dashboards 

Insight 1.4.1

What did we improve?

• Signality tracking files are now compatible with Insight
• Tracab DAT (.dat + .xml for metadata) files are now compatible with Insight
• STS Datahub API are now available for post-match analysis on Insight
• OPTA is available for post-match analysis (FTP/Bucket access supported)
• We’ve introduced new sequence filters
• We’ve introduced a new team filter for DVMS, Wyscout, OPTA, DFL API
• Wyscout filenames now include team names (previously these were numerical match IDs)
• You can now highlight the destination of passes, when using the “Numbers” overlay within the field widget
• We’ve introduced keyboard shortcuts to ease switching between video clips (⌥ + ⌘ + ←) or (⌥+ ⌘ + →)
• We've introduced a "my team" options in the "teams" settings to be used in team filters

What did we fix?

• We've improved the logic and configuration of widget colours for many widgets
• You can now rewind and fast-forward in 5 second increments when analysing match video

Insight 1.3.0 Release

What did we improve?

• A matrix widget is now available, allowing you to quickly identify players making and receiving a pass
• When using the field widget, a new "events number" overlay which presents zone-specific data is now available
• When using the field widget, a heatmap overlay highlighting events and activity is now available
• You can now subgroup games when using the chart widget
• For projects originally created and saved in "Live" mode, you can now add additional video
• To add the timeline widget, use keyboard shortcut (Opt+L)

What did we fix?

• When linking the events widget to the comparison widget, the data should now be accurate and automatically update
• You can now change the text colour of a Player's name when using the field widget
• You can now export charts to a Hudl Sportscode timeline, organiser or sorter
• When searching for past games from data providers, you should now see a full list
• The timeline widget now only refers to the match you select
• When using the goal-view widget, you're now able to change dot properties
• When creating new widgets with new default values or parameters, old widgets now automatically update
• You should now be able to re-open release notes
• Opening and adding dashboard widgets should now be quicker
• Updated and added new definitions within the Events glossary

Insight 1.2.3 Release

What did we improve?

• Improved support for Statsbomb event data
• Improved support for Skillcorner tracking data
• The Filter Wizard, including the widget header is available for sequences
• Experimental Sportlogic tracking is now available
• We have released new attributes for sequences
• You can now view the game time and period when using the tracking widget
• You can now include xG values from Wyscout event data
• New "timeline" widget to visualise events over time periods

What did we fix?

• Multiple bugs within the live workflow
• Wyscout games with extra time should now load in full
• 'Start' and 'End' conditions in sequences should now display correctly
• Dropdowns in Preferences > Sources now remain on screen
• You can now sort by date when searching videos (from panel view)
• Insight no longer crashes when recalculating data after duplicating a dashboard

Hudl Sportscode 12.69.1

What's Improved?

• We've made it faster to sync your work to Hudl. 'Sync to Hudl' is now its own dedicated button in playlists that becomes active when you have changes to sync. You don't have to look for it within the 'Upload' button menu anymore.
• Saving clips from your playlist is now clearer. The 'Save to Source' option replaces 'Sync to Source' in playlists. The functionality remains the same, saving your clips back to your Timeline or Database.

What's Fixed?

• We fixed a small issue where the wrong option appeared in the playlist menu overflow when the window was small. You might have seen a duplicate 'Export Video' instead of 'Sync to Source', which is now 'Save to Source'.
• Previously Sportscode would crash when you tried to upload a playlist after changing one of the row colours using the grayscale slider. You can now use the grayscale slider to customise your row colours without the risk of a crash during upload.
• You can now open playlists created in previous versions that include the TBar effect. When updating to version 12.69.0, some people experienced an error message ("This Document could not be opened") if their playlist had the TBar effect applied. We have resolved this issue so your playlists will open correctly, regardless of the version in which they were created.

Hudl Sportscode 12.68.0

What's Improved?

• If an issue occurs during capture that prevents a frame from being written to the movie file, you'll now see a count of the missing frames directly in the capture window. Previously, this issue was only logged internally, but now you have immediate visual confirmation of any skipped frames.

Hudl Sportscode 12.67.0

What's Fixed?

• An issue that caused your enhanced video capture to disconnect when the broadcast switched to a commercial break or halftime. You can now rely on a stable, uninterrupted feed without needing to manually reconnect.

Hudl Sportscode 12.64.0

What did we fix?

• Previously some games in the Competition Database weren't being displayed correctly because some season data was missing. We've now fixed this and you should now see all games.

Hudl Sportscode 12.62.0

What's Fixed?

• Update for macOS Ventura Users: The final supported version of Hudl Sportscode is 12.51.0, not 12.52 as previously stated. To receive future updates, an upgrade to macOS Sonoma or later is required.

• Previously when ending a capture, Sportscode would stall on the defragmentation process which prevented completion. We've now fixed this and captures should complete defragmentation and end.
   

Hudl Sportscode 12.61.0

What's New?

• The default video and audio angle settings in playlists are now persisted when uploading to Hudl. This means that when the playlist is downloaded from Hudl the enabled video and audio angles will match what was set when the playlist was uploaded in Sportscode.

What's Improved?

• In the Competition Database, recent competition suggestions that don't match the users selected sport will not be shown anymore.

Hudl Sportscode 12.60.0

What's Fixed?

• Syncing playlists to Hudl now works correctly in all cases. Previously, if a playlist included newly uploaded videos that hadn't been stored before, any sync on that playlist would make the previous videos not work on Hudl.

Hudl Sportscode 12.59.0

What's New?

• Ice hockey videos can now be accessed in Hudl Sportscode via the Competition Database.

What's Improved?

• When searching the competition database, you can now filter competitions across all sports, rather than just basketball. The UI has also been enhanced to display the sport for each competition.
• When a user selects "Default Angles" in a multi-angle playlist without choosing any additional options, all angles from the playlist are uploaded to Hudl. Now only the default angle will be uploaded.

What's Fixed?

• When toggling audio on or off the playhead will no longer jump to the beginning of the video.
• If the Competition Database fails to download a timeline, the video will still be available for use. Previously, the whole download would fail, making the successfully downloaded video unavailable for use.

Hudl Sportscode 12.58.0

What's New?

• We've made changes to the data model for Playlists (Sorters and Organizers) - you shouldn't notice any difference on the playlists themselves, but it means any new playlists created from 12.57.0 onwards are not backwards compatible with previous versions of Sportscode.

What's Improved?

• Row names, ordering, and colours are now preserved across playlist uploads and downloads. This ensures that playlists uploaded from Hudl Sportscode to Hudl.com more accurately reflect the original version, and maintain consistency when downloaded from your library.
• Building on our previous update that allowed playlists to reference existing video on Hudl.com, we've now extended this functionality to the competition database. Clips that reference existing video from the competition database are now uploaded more efficiently, resulting in faster upload times.
• When downloading a game from your Hudl library, Hudl Sportscode will now alert you if the download fails due to insufficient disk space on your local drive. You'll get a clear message explaining the issue and steps on how to resolve the problem.

What's Fixed?

• Previously, if a quick upload failed, the upload would continuously retry. Now, if referencing existing content on Hudl.com fails during a quick upload, Sportscode will attempt a full video upload. If that also fails, an error message will be shown instead of repeated retries.

Hudl Sportscode 12.57.0

What's New?

• We've made changes to the data model for Playlists (Sorters and Organizers) - you shouldn't notice any difference on the playlists themselves, but it means any new playlists created in this version (12.57) are not backwards compatible with previous versions of Sportscode.

What's Improved?

• Playlist syncing with Hudl.com is now significantly faster. Instead of reuploading all clips, Sportscode now only updates clips that have been added, removed, or modified.

What's Fixed?

• An issue where Sportscode would crash for users with licenses that were near expiration, specifically when the app was set to Italian.

Hudl Sportscode 12.56.0

What's Improved?

• In the main menu, the item previously titled “Wimu Data from Hudl” is now called “Hudl Signal” to match the recent product changes.

What's Fixed?

• The Upload button in the playlist toolbar now works as expected. If your navigation bar is too small to show both upload options, you’ll see them in the overflow menu. Previously, the submenu didn’t appear, so you couldn’t continue uploading.
• Changing angles in a clip now continues playback from the correct spot. In version 12.54.0, switching angles would restart the clip instead of picking up where you left off.
• Clips no longer disappear after uploading a playlist to Hudl. After uploading and reopening a playlist, all clips should now appear as expected—even when title rows are shown.

Hudl Sportscode 12.55.0

What's Improved?

• We now support playlist uploads with clips that reference existing video on Hudl.com and only upload clips that do not already exist. This brings the benefit of quicker upload speeds meaning you can view your content on Hudl.com much quicker.

What's Fixed?

• The retry button was not appearing after a cancelled playlist upload.

Hudl Sportscode 12.54.0

What's New?

• The License Registration window has been refreshed to make it clearer and easier to use. The license input field will now only appear when your device is unregistered, reducing confusion during day-to-day use. The layout has been updated to improve readability, and the process for validating your license is now much more straightforward with a dedicated Validate License button and helpful messaging. The 28-day countdown has been replaced with a simpler ‘Last Checked’ date and time, so you always know the status of your license at a glance. If you need to remove a license, this can now be done with a single, clearly labelled Remove License button.

What's Fixed?

• When presenting playlists in full screen, clips and slides sometimes skipped or unexpectedly jumped back to the start of the playlist. This has been addressed, so playlists will now play smoothly in the correct order without interruption.
• An issue with missing data in AFL Champion Data imports has also been resolved. Inside 50s and Stoppage vs events will now appear correctly in player rows, and the newly provided Tackle Physical Pressure stat from Champion Data has been added to the default configuration. These updates ensure that all key statistics are imported as expected for accurate analysis throughout the AFL season.

Hudl Sportscode 12.53.0

What's Improved?

• When downloading a game from the Competition Database, Hudl Sportscode will now alert you if the download fails due to insufficient disk space on your local drive. You'll get a clear message explaining the issue and steps on how to resolve the problem.

What's Fixed?

• A crash that could occur when using Enhanced Capture with a Limit 8 encoder that doesn't have a live feed connected. Previously, toggling Limit 8 sources on or off would crash Sportscode in certain configurations.
• An issue where slides added to an Organizer were appearing a few frames into the next video clip when exported using Export Video. This mainly affected workflows involving clips from Studio.

Hudl Sportscode 12.52.0

What's Improved?

• When uploading playlists to Hudl.com, if the video already exists in your Hudl Library and the playlist does not have any presentation effects we will do a quick upload allowing you to view your content on Hudl.com much quicker.

Hudl Sportscode 12.51.0 (57494.3413101)

• macOS Ventura Support Ending
  • Starting with the next release Hudl Sportscode 12.52.0, we will no longer support macOS Ventura. Users running Ventura will be locked to 12.52.0 as their final supported version of Hudl Sportscode. To continue receiving updates, please upgrade to macOS Sonoma or later.
• What's New?
  • Over the coming weeks, we're changing your Hudl Account login experience so you'll log in to Hudl Sportscode with the same password you use for Hudl.com, Replay, Hudl Instat, Wyscout, Insight, and other Hudl products. You'll still log in via Sportscode > Hudl Account, making access to your content seamless.
• What's Improved?

  • Enhanced Capture is being rolled out as the default capture method for select teams. Some of the benefits you'll see are:

    • Improved audio in the capture preview window.
    • Lower latency and better performance.
    • Multi-angle preview during capture.

    You can opt out at any time via Sportscode > Settings > Capture > Disable Enhanced Capture.
     

Hudl Sportscode 12.50.1

What's Improved?

• Opta Rugby imports now support the new Qualifier Sequence ID when using a custom timeline configuration file.

What's Fixed?

• You can now send timeline instances to a database after adding a new group or label using the code window. Previously, this caused an error, preventing the database from updating.
• Highlighted clips on the timeline will now stay selected as you scroll. Before, clips at the top would become deselected when scrolling back up.
• MP3 audio now works correctly with enhanced capture.
• Some users were experiencing crashes when going into full screen coding mode.
• Zooming in on the timeline no longer affects clip length adjustments and interactions in Code Mode. Previously, this caused a visual glitch where instances disappeared.
   

Hudl Sportscode 12.50.0

What's Improved?

• Opta Rugby imports now support the new Qualifier Sequence ID when using a custom timeline configuration file.

What's Fixed?

• You can now send timeline instances to a database after adding a new group or label using the code window. Previously, this caused an error, preventing the database from updating.
• Highlighted clips on the timeline will now stay selected as you scroll. Before, clips at the top would become deselected when scrolling back up.
• MP3 audio now works correctly with enhanced capture.
• Some users were experiencing crashes when going into full screen coding mode.

Hudl Sportscode 12.49.0

MacOS Sequoia

• Hudl Sportscode is now supported on macOS Sequoia (Version 15.0.0 and higher).

What's Improved?

• You'll now get an immediate message if you enter an expired license code on the registration screen, instead of seeing a success message and only finding out after a restart.

What's Fixed?

• Saving a new untitled playlist from the window title dropdown previously showed the wrong icon for reference playlists. The correct icon now appears.

Hudl Sportscode 12.48.0

What's Fixed?

• Macbooks running macOS Ventura on an Intel processor were getting corrupted video when downloading from Hudl/League Exchange. You will now be able to download working video.
• Previously Hudl Sportscode would crash for some people whose licenses had been deleted or weren't yet valid.

Hudl Sportscode 12.47.0

What's New?

• You can now clear the contents in group, notes and flag columns inside a sorter by clicking on the column actions and then 'Clear Column'.
• Multiple drawings can be deleted more easily inside playlists by using the select tool in the effects toolbar to do an area selection, or clicking on a drawing and pressing 'Command + A' to select all the visible drawings.

Hudl Sportscode 12.46.0

What's New?

• The Instance Player now has a stopwatch that can be used to manually track timing of events in instances.
• Group-based columns can now be deleted in the Sorter window.
• Instances belonging to games opened from Instat/Competition Database now provide context labels for the game they originated from.

What's Improved?

• Enhanced Capture has received significant stability and performance improvements.
• Enhanced Capture now doesn't re-encode captured video when using the "From Source" capture preset.

What's Fixed?

• Drag-selecting instances on the timeline will now scroll to allow larger selections of instances.
• Playback issues with some Sportscode packages.

Hudl Sportscode 12.45.1

What's Fixed?

• Some customers were experiencing issues when downloading a game from Competition Database where the video would be missing or corrupted and the timeline data wasn't accurate. We've fixed this issue and your downloads from Competition Database will now download correctly.

Hudl Sportscode 12.45.0

What's Improved?

• For basketball games in the Competition Database, Possession rows will now contain a full set of data similar to what is already viewable in Opportunity rows.
   

What's Fixed?

• When working with a Live Sportscode XML and retrospectively adding a tag to an otherwise blank event in CODA, duplicate instances will no longer be created in Hudl Sportscode.
• Customized playlist and matrix toolbars will now be saved correctly when you quit and restart Hudl Sportscode.

Hudl Sportscode 12.44.0

What's New?

• For Competitions that are organized in conferences, you can now filter Teams and Fixtures by Conference in the Competition Database window.
   

What's Improved?

• We improved the messaging on the login screen for when login fails.
   

What's Fixed?

• You will no longer be logged out of Sportscode when you lose connection to the internet.

   

Hudl Sportscode 12.43.0

What's New?

• Opta Rugby imports now account for new Qualifier IDs.

What's Fixed?

• Previously there was an issue where videos from Open from Hudl and Open from Exchange were downloaded in 5 minute segments, which was causing issues for some customers. We've now fixed this so it downloads as a single continuous video.

Hudl Sportscode 12.42.0

What's New?

• We heard from some people that presenting from Hudl Sportscode on a smartboard/touchscreen TV was causing problems where the video would start playing instead of using a selected drawing tool. We've now added an option in 'Settings > Movies' to use single and double-clicks to pause and play video in full-screen mode, to help with this.

What's Fixed?

• Some playlists downloaded via 'Open from Hudl' didn't contain video. The video will now download as expected.
• Previously, the teams dropdown in the 'Competitions Database' was limited in the number of teams it could display. This limit is now removed.
• An issue where your profile image appeared across the whole window in the Hudl Login screen.

Hudl Sportscode 12.41.0

What's Fixed

• An issue where sometimes blank video appears during a multi angle capture due to the angles starting at similar times.

Hudl Sportscode 12.40.1

What's Fixed?

• A crash when using the builtin drawing tools in a playlist.

Hudl Sportscode 12.40.0

What's Fixed?

• Previously when audio was muted in the Hudl Sportscode settings window, you'd have to toggle the audio in playlists and databases for it to work correctly between clips. Now when you unmute the audio, it'll remain unmuted between each clip.
• When using Label mode in a database and show/hiding columns, Hudl Sportscode would crash. This crash has now been fixed and the relevant label column will now show.

Hudl Sportscode 12.39.0

What's New?

• This coming season, we're excited to bring you basketball game video combined with Instat's more detailed and enhanced data, accessible from within Hudl Sportscode. Once you've logged into your Hudl account, you can access your basketball content from File > Open from Hudl > Competition Database. Just enter the name of the competition you need, and it'll show you a list of games played.

What's Fixed?

• We've fixed a crash that occasionally happened when editing Labels in a Sorter.
• Customers were encountering timeouts with customised OPTA data imports. The timeout has been increased to one hour.

Hudl Sportscode 12.38.0

What's New?

• You now have the option to maintain the ordering of rows when exporting a Hudl Sportscode XML from a timeline.
• When using Align and Align Right in a timeline, you now have the ability to move all or just selected instances to the playhead.

What's Fixed?

• Previously when you added drawings to a playlist clip and presented it in full screen, the video would sometimes jump a few frames before pausing. This has been fixed and will now pause on the correct frame.

Hudl Sportscode 12.37.0

What's Fixed?

• Performance improvements and under-the-hood enhancements.

Hudl Sportscode 12.36.0

What's New?

• You can now import Wimu Human Performance Sessions uploaded from SPRO into a Hudl Sportscode timeline.

What's Fixed?

• An intermittent issue where Capture with an AJA UTAP and “No audio source” would cause Capture to fail or the preview window to freeze.

Hudl Sportscode 12.35.0 

macOS Monterey

• This is the last supported version of Hudl Sportscode for macOS Monterey (macOS 12). To receive further updates please upgrade to a newer macOS version.

What's New?

• You can now automatically align imported Sportscode XML with video in a timeline when it contains Session Info Start Time.

What's Improved?

• When combining timelines, you will now be given the option to remove any duplicate data and data collected outside of active play.

Hudl Sportscode 12.34.0 

What's Fixed?

• Performance improvements and under-the-hood enhancements.

Hudl Sportscode 12.33.0

macOS Monterey

• In June, Hudl Sportscode will no longer get updates for users running macOS Monterey (macOS 12). To ensure continued access to the latest features and improvements, we recommend upgrading to the latest macOS version available. If you have any concerns please contact Hudl Support.

What's Improved?

• Previously, when click-dragging an instance on the timeline during live capture, the playhead could become stuck to cursor movement. The playhead will no longer get stuck to mouse movement.
• Previously, sending an empty playlist to Studio would result in a confusing error message. You now won't be able to Send to Studio until clips are selected first.

Hudl Sportscode 12.32.0

What's Improved?

• In 12.28.0 we changed duplicating instances onto a new row in databases to appear at the end of the database rather than underneath the original instance. We heard from some teams that they preferred the old behaviour, so we added an option in Settings that lets you return to this. Simply go to Settings > Rows > Overlap instances.
• Previously, our messaging was unclear if you tried to send content to Studio, but didn't have Studio installed, or it failed to open. We've improved our messaging to make it more clear what the issue is.

Hudl Sportscode 12.31.0

What's New?

• We've made it easier to work in databases. You can now reorder clips when you're working in the Code View.
  

What's Improved?

• Opta Rugby Union data import has been updated to synchronise with the latest feed updates from Opta.

 What's Fixed?

• Previously, when playing clips in an Organizer, the playback would jump back when switching angles mid-clip. The clips will now continue playing from the point where you switched angles.

Hudl Sportscode 12.30.0

What's New?

• You can now send clips from one database to another database.

What's Fixed?

• Previously, an issue on macOS Sonoma didn't let you load a CSV file list in the Alternate Names section of the Code Window inspector. You'll now be able to load in a CSV file.

Hudl Sportscode 12.29.0

What's New?

• You can now connect to STS DataHub for post match retrieval of official MLS data

What's Improved?

• Instances opened via a matrix from a database are now sorted based on the start time from the source.
• You can now reorder clips in the sorter view of a database by using drag and drop.

What's Fixed?

• Minor improvements to performance of databases.

Hudl Sportscode 12.28.0

What's Fixed?

• A crash on macOS Sonoma when scripting files exceeded 100 lines.
• An issue where the transparent background on code window buttons were not being respected on macOS Sonoma.

Hudl Sportscode 12.27.1 Hotfix

What's Fixed?

• An issue where users were not prompted to install Rosetta, leading to functionality issues in Capture, Live Sharing, and the Hudl Replay integration.

Hudl Sportscode 12.27.0

What's New?

• We've expanded the ability to create Game Time to allow you to manually add it to footage which doesn't have a game clock on screen.

What's Improved?

• Previously, Game Time search filters were being ignored when selecting data source in Advanced Find. This will now work when you select Game Time as a search filter when selecting data source.
• The original video time was showing when you'd selected Game Time in the Instance Player and then went into full screen. This will now display the clock you'd selected in full screen.

Hudl Sportscode 12.26.0

Setting Audio To Mute By Default

• We've heard from some of you that you don't want videos to open with audio playing. We've now made it a setting so all videos players will open with muted audio by default. You can enable this through Sportscode > Preferences/Settings, and go to 'Movies'

What did we fix?

• Rugby heat map diagram now returning correct X/Y coordinates
• An issue where the playhead on the timeline would sometimes jump straight to the beginning when pressing play during a capture

Hudl Sportscode 12.25.0

What did we fix?

• UI improvements to the STS Datahub window.

Hudl Sportscode 12.24.0

What did we improve?

• We've enhanced the Game Time feature we recently released so Game time will now also appear in playlists and databases.
• We've added Timeline Row Operations which let you select rows and use AND/NOT/OR logic to create new rows from it. For example, if you have a row for 'In possession', you can select the row and choose a 'NOT' operator to create a new row with instances for 'Out of Possession'.

What did we fix?

• Previously when you dragged a Game Time row, it was causing some rows to disappear, and this is now working as expected.

Hudl Sportscode 12.23.0

What did we improve?

• You can now use an exciting new feature called ‘Game Time’ to view and analyse game time in your pre and post-match workflows. Using an OCR reader (optical character recognition), the reader extracts game time from an on-screen clock in broadcast feeds and incorporates it into the data model. you can find out more about this here.

What did we fix?

• We've identified a couple of issues in the Enhanced Capture feature which we're working on fixing. In the meantime, we're turning this feature off for anyone who hasn't specifically enabled it in Preferences. You can still use Enhanced Capture by enabling it in your Preferences.

Hudl Sportscode 12.22.0

Live Streaming - Shared Timeline

• Users of Live Streaming Sessions can now collaborate in real time, across one shared timeline, when analysing live games and practices.
• To use this feature each joiner will need an Elite licence and enable the Shared Timeline in the Hudl Sportscode Settings/Preferences.
• Learn more about how the Shared Timeline can enhance your live analysis workflows by reading our blog.

What did we fix?

• When downloading playlists from your Hudl Team Library, you should no longer see black video at the start of clips.

Hudl Sportscode 12.21.0

What did we fix?

• On macOS Sonoma, when opening an Insight timeline including offset, videoOffset & videoDuration, the alignment is now correct.
• On macOS Sonoma, when initially opening a sorter with a number of clips in, the index was incorrect, and the selected row icon wasn't visible. These have now both been fixed.
• Previously, when flagging on the instance player after deleting a row in the timeline, Sportscode would sometimes crash. This has now been fixed.
• When uploading multiple items to Hudl, scrolling to the top of the Progress Queue window was creating a confusing view where a later progress bar was projecting onto the first upload. The progress on each upload will now be accurate.

Hudl Sportscode 12.20.0

What did we improve?

• Multi-angle Playlists can now be downloaded from a user's Hudl Library via Open From Hudl.
• The Playlist “Synchronise” toolbar option has been renamed to “Sync to Source” to reduce confusion with “Sync to Hudl”.
• The messaging on the progress queue has been improved when synchronising a Playlist to Hudl.

What did we fix?

• Multi-angle Playlists were being synced up to Hudl as single angle.
• During the upload of an unsaved Playlist, a prompt for saving would occur midway.
• Open From Exchange would display the "Open Hudl" button instead of the "Open" button after finishing a download.
• The progress queue messaging would flicker when syncing a Playlist to Hudl.
  

Hudl Sportscode 12.19.0

What did we improve?

• When performing a playlist sync back to Hudl, if the Hudl.com version has been modified, you will now be given the option to upload it as a new playlist instead, preventing any work being overwritten.

What did we fix?

• A crash when entering incorrect RTP IP feed addresses
• An issue with IP feeds using an SDP file path including a space.
• The folder created by Hudl Upload is now deleted properly once the .sczip is created.
• Cancelling a Hudl Upload during the "preparing video" phase now cancels properly

Hudl Sportscode 12.18.0

What did we improve?

• You can now use the keyboard shortcut 'Control + Shift + S' to split instances.

What did we fix?

• We fixed downloading via the “Open from Hudl/Exchange” to download the best video quality available.
• We fixed playlist syncing so it no longer retries when the user is logged off.

Enhanced Capture Release

• Enhanced capture improvements are now enabled by default. These improvements can be disabled through the Hudl Sportscode Preferences/Settings.
• Captures using IP capture will benefit from:
  • HD 1080p capture preview resolution
  • Fast angle switching in capture preview
  • Unicast feed support
  • Reduced latency audio
  • Reduced CPU usage
  • Reduced network usage
  • Reduced disk usage
  • Reduced latency for Replay & Live Sharing
  • Increased accuracy in reading instance time
    

Hudl Sportscode 12.17.2

What did we improve?

• Playlists can now be synced from Hudl Sportscode to a Hudl.com team library.
• The Open From Hudl window can now be refreshed via a new Refresh button without having to close and re-open the window.
• Videos and Playlists that are processing on Hudl.com will now be displayed in the Open From Hudl window.

Enhanced Capture Beta

• To enable the new enhanced Capture Beta go to your Hudl Sportscode Preferences/Settings.
• When using this with IP capture you will benefit from:
  • HD 1080p capture preview resolution
  • Fast angle switching in capture preview
  • Unicast feed support
  • Reduced latency audio
  • Reduced CPU usage
  • Reduced network usage
  • Reduced disk usage
  • Reduced latency for Replay & Live Sharing
  • Increased accuracy in reading instance time

Hudl Sportscode 12.16.0

What did we fix?

• Label Columns are now displayed for Sorters downloaded via Open From Hudl.
• Better error messaging when trying to download content via Open From Hudl that is no longer available in Hudl.
  

Hudl Sportscode 12.15.0

What did we improve?

• Listening to audio from IP feeds in the capture preview now has reduced latency. When enabling this experimental feature, you will also benefit from performance and quality improvements in the capture preview window.
• You can now move instance notes to label columns within a Sorter. This means you can now have more than one column for your notes. Click here to find out more.

What did we fix?

• Uploading Playlists containing a large number of clips will now be fully processed in Hudl without Hudl support interaction.

Hudl Sportscode 12.14.0

What did we improve?

• When capturing using a local capture device, users who join the session on Replay will now see lower latency.
• There are now tooltips in the sorter and organizer. You can hover over icons and informational text will appear.

What did we fix?

• Fixed a crash when using grayscale colors in heat map charts in the code window.
• Hudl Sportscode now won't hang when uploading Playlists to Hudl.
• When downloading Playlist Clips from Hudl, you can now correctly trim the clips.

Hudl Sportscode 12.13.0

What did we improve?

• You can now align and stack multiple (up to 12) instance player windows. This is available through 'View > Stack Instance Players' or using 'CMD + Y'. Find out more here.
  

What did we fix?

• Some links in the Upload Playlist to Hudl workflow were not working in some languages. These have now been fixed.
• Previously the Effects checkbox for a Playlist Upload was enabled and existing effects were uploaded regardless of whether a user was attempting to upload Default or All Angles. Now the Effects checkbox is enabled and effects uploaded only when Default Angles is selected.

Hudl Sportscode 12.12.0

BigSur

• This will be the last supported version of Hudl Sportscode for macOS BigSur. To receive further updates please upgrade to a new macOS version.

What did we improve?

• You can now close all open instance windows by either using the 'File' menu item or the keyboard shortcut 'CMD + SHIFT + W'.
• Users are now able to differentiate between a single-angle and multi-angle video more easily when using Open from Exchange.
• Users are now able to view a thumbnail preview for each angle by using the preview button, to help more easily identify and select the angle(s) required for download.

What did we fix?

• When ingesting a capture via live sharing or live streaming, scrubbing through the timeline on Apple Silicon machines would cause the video to lag. This is now fixed and scrubbing is smooth, without any interruptions.

Hudl Sportscode 12.11.0

BigSur

• In June Hudl Sportscode will no longer support macOS Big Sur (macOS 11). To ensure continued access to the latest features and improvements, we recommend upgrading to the latest macOS version available. If you have any concerns please contact Hudl Support.

What did we improve?

• You can now rewatch instances, when all instances have finished. Either by clicking the play button or pressing the spacebar.
  

What did we fix?

• Trying to login to STS Datahub import with an invalid client ID will no longer lock you out. Instead, you will now be prompted to check your client ID and retry.
• Fixed an issue where the Upload button was inactive whilst a playlist was being uploaded.
• Duplicating a row in the Statistical window will retain the selection of ‘Use Regular Expression’.

Hudl Sportscode 12.10.0

 What did we fix?

• Fixed an issue where timeline instances were misaligned when using SRT IP feeds.
• Fixed overflow menus in the Database, Matrix and Playlist windows.
• When dragging and dropping slides or images into an organiser or sorter, the media will now appear after exporting
  

Hudl Sportscode 12.9.0

What did we improve?

• You can now listen to the audio of the angle you’re currently previewing in the capture window. This works for IP feeds on both Apple Silicon and Intel machines. To access this functionality, you can enable it in the Hudl Sportscode settings. It is worth noting that this feature is still in the experimental phase.

 What did we fix?

• Ending a live streaming session now correctly ends the session, enabling a new live streaming session to be created.

Hudl Sportscode 12.8.0 

 What did we improve?

• You can now change the name of your Live Streaming Session.
• You can now add Hudl labels to Playlists before uploading them to Hudl.
• You can now use show unique string within the statistical window.

 What did we fix?

• Matches imported via STS Datahub containing GoalKick events without corresponding Play sub-events can now be imported.
• Downloading a Playlist containing a Clip name greater than 255 characters no longer causes a Hudl Sportscode to crash.
• Use Regular Expression selection in statistical window persists after closing.
  

Hudl Sportscode 12.7.1 Hotfix

 What did we fix?

• Resolved an issue that would cause Hudl Sportscode to crash when opening the capture preview window following a local capture and live streaming session.

Hudl Sportscode 12.7.0

Live Streaming Sessions

• You can now live stream a capture to other Hudl Sportscode users meaning that your team of analysts can code any game from anywhere.
• The video will be available in your Hudl library once the live stream upload has ended and the video is processed.
• Explore this feature further with this blog.

 What did we improve?

• You can now better manage the timelines within your video package; adding or deleting them as needed. With this change, when launching a video package, the last accessed timeline will be opened. Click here to find out more.
  
• You can now easily transcode your videos when adding them to your playlists. Simply go to "Insert > video" and customize the transcoding settings according to your preferences. Click here to find out more.
  
• You can now set sharing permissions on Playlist uploads.
• You can now double click on an item to start a download when using Open From Hudl.
• You can now use SRT IP feeds for single-angle live capture.

 What did we fix?

• We have resolved an issue where slides and images added to playlists stored on Fat32 or ExFat formatted hard drives were not being saved upon re-opening. They will now be retained.
• The overflow menu for the timeline toolbar now works as expected.
• Labels and notes are now being downloaded for Playlists via Open From Hudl.
• You will now reliably see a disconnection alert when RTMP or RTP IP feeds are disconnected during capture.

Hudl Sportscode 12.6.2 

 Changing playlist views

• You can now seamlessly switch between Sorter and Organiser views within the same playlist, combining the functionality of both playlist types for an even more powerful curation experience. Explore this feature further with this video.

 Sending clips from output reports to playlists

• You can now send instances directly to a playlist from an action button in your Code Window, meaning it is now much easier to get insights from your reports into your presentations while reducing the time and effort required to curate and organise content. Click here to learn more.

 What did we improve?

• You can now customise the highlight colour of instances on your timeline, helping you identify selected instances with ease. Click here to learn more.
• You can now listen to the audio of the currently previewed angle in the capture window for IP feeds. To access this functionality, you can enable it in the Hudl Sportscode settings. It is worth noting that this feature is still in the experimental phase.
• We've updated the following qualifiers when using OPTA Rugby League Import in Hudl Sportscode:
• “Penalty" - This will now display as "Penalty Conceded" to indicate penalty direction.
• "Unknown 40" - This will now display as "Ball Movement".
  • Added in new qualifiers to PTB Result; Pass Type, Penalty Group, Substitution Reason, Attacking Action Type, Defensive Action Type and Ball Movement
• The time remaining displayed when uploading playlists is now more accurate.

What did we fix?

• Issues related to relinking clips in a playlist.

Hudl Sportscode 12.5.0

Screen Recording

• You can now effortlessly share your presentation using Hudl's latest screen recording tool, accessible directly from the Sorter and Organiser. 

 What did we improve?

• When loading the Upload Playlist modal for large playlists it no longer feels like Hudl Sportscode becomes unresponsive.

 What did we fix?

• Translated texts on the Upload Playlist modal now wrap rather than being clipped.
• Playlists that were failing to upload to hudl.com due to an AWS error now upload correctly.
• Email addresses containing an apostrophe can now be used to login to hudl.com through Hudl Sportscode.
  

Hudl Sportscode 12.4.27

What did we improve?

• You can now drag and drop external videos directly into your playlists.
  
• You can now easily switch between timelines within a video package directly from the timeline toolbar.
  
• When running your Saved Searches in your timeline, any new searches will now be automatically added to the toolbar icon.

Hudl Sportscode 12.4.26 - Hotfix

What did we fix?

• Timeline data in the Sportscode XML is now included when uploading to Hudl.
  

What did we improve?

• You can now drag and drop slides directly into a sorter or organiser, making it quicker and easier to create presentations. For more information click here.
• You can now control the visibility of the video player zoom indicator via the ‘View>Video Control’ setting.
• On successful upload of a Playlist you can now open your Hudl Team Library directly from the progress queue.
• Minor UI improvements for the Upload to Playlist to Hudl modal.

Hudl Sportscode 12.4.24 

 What did we improve?

• Search results in the find window are now updated with changes in the front timeline, front playlist and selected database.
• You can now remove duplicate labels from selected instances in a front timeline or database.
  
• You can now import Opta data for Rugby League games to your timeline.
• You can now retry uploading a playlist to your Hudl Team Library from the Progress Queue if it fails.

 What did we fix?

• You can now upload a playlist to Hudl with a name containing a forward slash.
• The default angle button radio button is now preselected when changing from a multi-angle to single angle playlist on the Upload Playlist to Hudl modal.
  

Hudl Sportscode 12.4.23

What did we fix?

• A performance issue that occurred when completing consecutive captures whilst also live sharing.
• Improved video download performance when joining a live share session.

Hudl Sportscode 12.4.22

What did we improve?

• Playlists can now be uploaded directly to a team's library on hudl.com without needing to upload it on the website.
• You are now able to utilise the trackpad to interact with videos within Hudl Sportscode. Pinch to zoom in to all video players and utilise a two finger swipe to scrub through footage.  

What did we fix?

• When presenting on an external display, videos will now remain synced whilst using playback controls.
• Using Live Share between Sportscode versions is now backwards compatible (except for 12.4.20 and 12.4.21). Previously using Hudl Sportscode version 12.4.19 or below wouldn't allow users to Live Share sessions with version 12.4.20 and above.
• Hudl Sportscode will now use less machine resources when using the Capture Preview Window

Hudl Sportscode 12.4.21

 What did we improve?

• It is now quicker and easier to surface insights from a video package as you can execute a saved search directly from your timeline toolbar. For more information check out this video

What did we fix?

• Improved the quality of overlay text on videos exported from Playlists.
• You can now add a buffer to the video in the capture preview window to ensure smooth playback.
  

Hudl Sportscode 12.4.20 

 What did we fix?

• Performance improvements and under-the-hood enhancements.

Hudl Sportscode 12.4.19

What did we fix?

• A crash when uploading playlists or packages greater than 4GB via Hudl Upload.

Hudl Sportscode 12.4.18

 What did we fix?

• Corner events imported via STS Datahub will now start when the corner kick is taken, instead of when the corner is drawn.
• Delay on the capture preview window on Intel machines when using IP feeds from Antrica encoders has been reduced.
• Playlists with slides uploaded to Hudl.com now play back correctly in Hudl with no black frames or overlapping clips.
• Removed the option to filter by and select playlists from the Upload Timeline to Existing Package window.
• Images used in Playlists slides are now positioned correctly in the middle of the slide when exporting.

Hudl Sportscode 12.4.16

Find Window Improvements

• You can now duplicate a saved search making it easier to curate similar searches.
• Advanced find search queries are no longer case sensitive.
• You now have the ability to re-order your saved searches by drag and drop; making it easier to organise your searches.
• An advanced find sub-query now displays the correct results for 'Is Not'.

What did we fix?

• Playlists containing effects on the first frame now display the effect in the correct position when uploaded and viewed in hudl.com.
• Downloading and opening a multi-angle package from a server now correctly opens the package.
• Capture frame rate is now remembered after unplugging and plugging in local capture devices.

Hudl Sportscode 12.4.15

Find Window Improvements

• You can now search across any Playlist as a data source, using 'All Playlists In Folder' or a 'Custom Selection of Playlists'.
• We have made it easier to update Saved Searches, as they will now autosave.
• You do not have to save a search in order to retain it, you can now close the find window and, upon re-opening, the unsaved search will still be there.
• It is now easier for you to save, delete, import and export searches, with a new and updated layout.

Universal Build

• Hudl Sportscode now runs natively on Apple Silicon machines (M1, M2 etc.), this removes the need for Rosetta.

What did we improve?

• You can now edit information in the Sorter without the clip starting from the beginning.
• You can now control the size of the Instance Player through menu item 'View' or using the keyboard shortcut: 'Control' + '>' or '<'.

Hudl Sportscode 12.4.14

What did we improve?

• You now have more time when flagging to add notes to playlist instances - we've introduced an automatic pause before the clip resumes play.
• Rows edited in a sorter now automatically highlight, making it easier to see what you're changing.
• When using the Hudl Remote, the video control buttons now allow you to press and hold.

What did we fix?

• In the Statistical window, the rank and unique rank scripting commands now support decimal places.
• When in a sorter, previous rows are now automatically selected after deleting a row.
• When importing basketball games via Synergy, you will now see the Period field properly populated.
• Removed the ability to save a Playlist downloaded from Hudl.com as a sorter for Pro and Pro review license types.
  

Hudl Sportscode 12.4.13

What did we improve?

• You can now search for any code, label or note within your front playlist using the new and improved Find Window.
• Champion Data imports now support Center Bounce Throw Ups events.
• STS Datahub now displays data from competitions that don't have any clubs linked.
• Labels and instance notes are now supported for Playlists downloaded from a user's Hudl Team Library. This applies to new playlists that are uploaded to Hudl from Sportscode.
• Improved progress bar UX for Playlist downloads.

What did we fix?

• Importing a DFL XML or from STS Datahub now allows Shot actions within a KickOff event.
• Playlists downloaded from a user's Hudl Team Library now scrub smoothly.
• Uploading a playlist downloaded from a User's Hudl Team Library no longer errors with "An unknown error occurred".
• Cancelling an Open From Exchange download, now displays "Cancelled" instead of "Download Completed" on the progress bar.

Hudl Sportscode 12.4.12

What did we improve?

• Users can now choose to download Playlists from their Hudl Team Library as either a Sorter or an Organizer.
• Updated Capture Inspector messaging to include sharing to Insight.
• Users can now import Synergy data from Baseball games.
• Users can now Relink Video when the playlist is open via Relink Video in the Edit menu.

What did we fix?

• Labels will now be saved when added to a Playlist downloaded from Hudl.com.
• The insufficient permissions alert now specifies that the microphone permission is also required.
• Opta Rugby Imports now account for new Event & Qualifier IDs.

Hudl Sportscode 12.4.11

macOS Catalina

• As of the 12.4.11 release we will no longer be supporting macOS Catalina. 12.4.10 will be the last release supporting this OS. For the best experience, and to make the most of recent HSC improvements, customers should now upgrade their macOS.

What did we improve?

• Users now have the option to de-interlace timeline video when capturing RTP feeds discovered via SDP files provided they are on Apple Silicon.
• You can now download playlists from your Hudl team library as an organizer via 'Open from Hudl' 
• When sending from playlists to databases if the clips come from different timelines we respect the ordering in the playlist instead of sorting by timeline .

What did we fix? 

• You can now access the instance context menu in a timeline and organizer by pressing ‘Control’ and clicking the instance.
• Fixed an issue when Collaborative Coding with the same Code Window that would result in rows with the same name being duplicated in the timeline.
• The sczip file generated from an Upload to Hudl now uses the correct thumbnail.
  

Hudl Sportscode 12.4.10

What did we improve?

• Hudl Sportscode will now remember the size and location of your instance player windows on your active screen.
• We've added more editing controls for clips in the timeline. When editing a clip, by releasing the drag bars, the edit bar will refresh.
• You can now launch your Find Window from the main menu bar.
• You can also get to your Find Window with the shortcut 'Command' + 'F'.
• When sending clips from Insight to a Hudl Sportscode timeline, the timeline instances can now be sent on to a Hudl Sportscode Sorter or Organizer, without having to save the timeline first.

What did we fix?

• Saving a playlist via the menu bar would cause Hudl Sportscode to become unresponsive.
• The statistical window will correctly retain the cell selection when performing row and column actions.
• When entering full screen we now retain the set playback speed.
• Corrected a visual issue in the video export pop out.
• Charts will now always display 0 values.
• Instances sent to a playlist through the find window, will now populate the ‘original instance’ data.
• Any changes to instances added to a reference playlist through the find window, will now synchronise back to the original ti

Hudl Sportscode 12.4.9

Find Window

• You can now easily search for any code, label or note across your timeline, database or a custom selection of folders with the new Advanced Find feature available in the Find Window (CMD+F). For more information check out this blog.
• You can now save your quick and advanced searches within the Find Window (CMD+F); now you will only need to build your queries once. You can also share these searches with other members of your team with our new import/export option.

Heatmaps

• You can now use Heatmaps to visualise location data in HSC, providing more context to game events and identifying trends. This can be achieved without any knowledge of scripting. For more information check out this blog.
• When using Heatmaps you can also tag your own location data and see this update automatically in real time, live or post game.

Statistical Window

• You can now use the statistical window to manipulate data into a standardised format so that it can be copied and pasted into other applications, such as Excel.

What did we improve?

• You can now send instances from Insight directly to your Hudl Sportscode Playlists.
• You can now open Insight directly from the timeline, using the menu item (File > Open Insight) or using the keyboard shortcut 'CMD' + 'OPTION' + 'i'.

Hudl Sportscode 12.4.8

What did we fix?

• Performance improvements and under-the-hood enhancements.

Hudl Sportscode 12.4.7

What did we fix?

• Fixed an issue that caused instance text to overlap with the studio icon in an organiser.

Hudl Sportscode 12.4.6

What did we improve?

• You can now see instance information, such as flags, labels and notes, within the Organiser.

Hudl Sportscode 12.4.5

What did we improve?

• You can now choose to 'Keep existing labels and rows' when changing sources in a matrix.
• We've added a Type column to the 'Open from Hudl' window to make it easier for you to see between Game, Scout and Practice film.

What did we fix?

• We've fixed an issue where closing the Open From Exchange window would stop downloads that you had in progress.
• Fixed an issue where during a Live Sportscode XML import without merging overlapping instances, changes made post instance creation would duplicate the instance on the timeline

Hudl Sportscode 12.4.4

What did we improve?

• You can now easily set and adjust the location of the timeline and player windows from the 'View' menu or using the shortcut 'CMD' + '>' or 'CMD' + '<'.
• Users are now able to share multiple reports to Hudl Replay.

Hudl Sportscode 12.4.3

macOS Monterey

• We now support macOS Monterey on Apple Silicon (12.2.1 or Higher)
  

What did we improve?

• Added the ability to quickly upload League Exchange content from Sportscode to Hudl
  

What did we fix?

• In the Sorter, users can now write in the instance notes column and edit the clip length without the instance note text disappearing.

Hudl Sportscode 12.4.2

macOS Monterey

• We now support macOS Monterey on Intel machines (12.2.1 or Higher).
  

What did we improve?

• Code Window Name will auto hide on small code windows (Big Sur and Monterey Only)
• Added Ability to toggle between modes in the overflow menu in the Code Window
• League Exchange fixtures tagged by Hudl Assist will now display a tag icon in the Open from Exchanges window
  

What did we fix?

• Resolved an issue where removing certain values from the chart settings inspector could cause a crash
• Fixed an issue where the Capture Preview could flicker when connected to multiple IP feeds.
• Fixed an issue where Open From Exchange and Open From Hudl downloads would fail following an update to macOS Monterey 12.3
  

Hudl Sportscode 12.4.1 

What did we improve?

• Added more translations for better global coverage

Hudl Sportscode 12.4.0

What did we fix?

• Fixed an issue where a reference sorter would show a black screen if the file location was moved

Hudl Sportscode (HOTFIX) 12.3.11

What did we fix?

• Fixed an issue where the video on the capture preview and timeline window would become pixelated
  

Hudl Sportscode 12.3.10

What did we fix?

• Fixed an issue where the video in the Capture Preview window was stuttering
• Fixed an issue that could result in incorrect data being displayed in the matrix in certain scenarios

Hudl Sportscode 12.3.9

What did we improve?

• A user can now enter the first editable cell of any row in the sorter by using the return key; making it easier and quicker to edit cells using the keyboard.
• Sportscode will now remember the frame rate of each Local Capture device.

What did we fix?

• Fixed an issue where the background image on HTML reports would be cut off on very large code windows.

Hudl Sportscode 12.3.8

What did we improve?

• An opened timeline is automatically closed if a user cancels the download.
• Added an icon to display when a fixture has tagging data attached.
• You can now make more adjustments to the clips you wish to edit within a sorter or organiser. When editing a clip, by releasing the drag bars, the edit bar will refresh.
• Changed the overlay text in the sorter to reflect the row number of each instance.
• In the sorter; when entering a cell containing labels the text cursor will default to the end of the cell.

What did we fix?

• Fixed an issue with the drag rectangle in an organiser disappearing beneath the rows and instances.

Hudl Sportscode 12.3.7

What did we improve?

• Added video playback controls to all editable cells in a Sorter row.
• Added a link to the progress queue to the main navigation bar and as an option to add to the timeline toolbar.
• Dates are now prepended to package names that are generated via Open From Exchange.

What did we fix?

• Fixed an issue with live notes not displaying multi-line notes correctly, in certain scenarios.

Hudl Sportscode 12.3.6

What did we improve?

• Added a new preference item to the existing Rows preference to control whether instances merge or remain separate when manipulated in the timeline. This includes creating a new merged row or extending, duplicating or creating an instance.
• Added ability to use 'CTRL' & click on individual rows to open the context menu in the sorter.
• The latest version of Studio includes some exciting new features, some time-saving enhancements to the calibration workflow, and support for rugby. Click here for a blog that explains all the details.

What did we fix?

• Fixed an issue where Synergy data wasn't being imported properly
• Fixed an issue where the Open From Exchange scroll bar didn't default to the top of the fixture list after changing seasons
• Fixed an issue where black video was inserted into playlists that have been created from Open From Exchange video

Hudl Sportscode 12.3.5

What did we improve?

• You can now queue up multiple games in 'Open from Exchange' to download. If you're doing opposition research, or just need to download your last few games, simply select each game and it'll get added to your Progress Queue. And you'll still be able to start working on your first game download right away.
• When editing label, row name and flag columns in a sorter, tab+control can now be used to commit the change and move to the next clip with the field below ready for editing. Similarly, the Shift+Tab+Control hotkey can be used to move up to the previous cell.
• Added a new scripting command, Unique String, which can be used to return unique label names from a specified group.
• Updated the default Champion data import to include team name labels in player, Inside 50 and Rebound 50 rows

What did we fix?

• Fixed an issue where the Columns button within Sorters and Databases wasn't working in Chinese (Simplified), Japanese or Korean.
• Fixed an issue where the background area in the full-screen movie time would appear to flicker
• Fixed an issue where stopping HSC Capture without closing HSC would result in a black screen when switching angles

Hudl Sportscode 12.3.4

What did we improve?

• Instances from all machines are now sent to Replay when on a collaborative code scenario.
• Added a new floating toolbar to display the Original Video time when in Full screen mode which can be activated from the View menu item or keyboard shortcut (shift + command + O).

What did we fix?

• Fixed an issue in Open From Exchange where duplicate league names couldn't be displayed in the league dropdown.
• Fixed an issue where using control + enter in notes fields to add an extra line could cause Hudl Sportscode to crash.
• Fixed an issue where the Register button did not display correctly, in certain scenarios.
• Fixed an issue where all cell text was not displayed when resizing a label group column, in certain scenarios.

Hudl Sportscode 12.3.3

What did we improve?

• Added text wrapping controls to a Sorter so that each row can now be displayed as either a single line or multiple lines where the row height will be automatically adjusted to display all cell contents based on the column width.
• In live scenarios, the row order on viewing machines will now be maintained if they have been manually configured.

What did we fix?

• Fixed an issue in a sorter where the tab key would not progress to the next clip after editing the contents of a cell.
• Fixed an issue where selecting a label group cell in a sorter would not correctly enter an edit state, in a certain scenario.
• Fixed an issue where a Standalone Playlist would unexpectedly come to the front during flagging.
• Fixed an issue where League Exchange video and data download permissions weren't being respected in Open From Exchange.
• Fixed an issue in the code window inspector that caused fields to be truncated, in certain scenarios.
• Fixed an issue where the 'Register' button text was truncated in certain languages.
• Fixed issue where the insert menu item was visible with Gamebreaker licenses.

Hudl Sportscode 12.3.2

Charts in Code Windows

• Bar, Column, Stacked Bar, Stacked Column and Pie Charts can now be created in Code Windows using Elite and Elite Review licenses. All chart values can be set to display linked video using the new chart scripting command. Click here to learn more or click here for support resources about how to create Charts in Hudl Sportscode.

What did we improve?

• Added the ability to create a new row and use option, click plus drag to copy instances between rows in the code view of a Database.
• When video is launched from an action button on a Database, instances are now sorted by transaction order, then start time.
• Added support to filter the fixtures by team when downloading via ‘Open from Exchange’.
• Added support to allow for re-editing of effects in Studio when a clip with Studio effects is copied to another playlist.

What did we fix?

• Fixed an issue that cause the playhead to jump to the beginning of the timeline while capturing, in certain scenarios.
• Fixed an issue in macOS BigSur that showed an extra text cursor in different text fields.

Hudl Sportscode 12.3.1

What did we improve?

• Added the ability to edit a row name in a sorter.
• Added a loading indicator to the ‘Open from Exchange’ window to make it clear when the fixtures list is updated.
• Added support to filter the fixtures by team when downloading via ‘Open from Exchange’.
• Changed the Original Video Time to show the time in hour format for better consistency with timeline time format.

What did we fix?

• Fixed an issue on macOS BigSur that caused the scroll bar to not begin from the top of the DB in sorter view.
• Fixed an issue on macOS BigSur that caused an extra text cursor to appear sometimes during text entry.
• Fixed an issue where a longer code names appeared truncated in Find window.
• Fixed an issue that caused an empty sorter to still show earlier linked video, in a certain scenario.
• Fixed an issue where flagging column in sorter did not show the updated flag, until the playlist was reopened or a row was moved.

Hudl Sportscode 12.3.0

What did we improve?

• Code windows opened and edited in this version cannot be opened in previous app versions. It is recommended for users to be on the same 12.3.0 version and higher, to facilitate sharing.
• Added support to count all labels in instances within the Matrix.
• Added support to filter by season when using the ‘Open from Exchange’ integration in Sportscode.
• Improved workflow for timeline player during label mode, looping behavior is now maintained if playback speed is modified within the instance bounds.

What did we fix?

• Fixed an issue where instances from a Sharing machine would sometimes not appear on the Viewing machine, under certain conditions.
• Included new data identifiers for Opta Football Import for 2021/22 season.

A separate reminder that this update and beyond shall not be available to Mojave users

Hudl Sportscode 12.2.48

macOS Mojave

• This will be the last Hudl Sportscode update that supports macOS 10.14 Mojave. Mojave users will no longer be prompted to install Hudl Sportscode updates.

What did we improve?

• Added ability to select which video angle you want to download via ‘Open from Exchange’, so that you can access the video you need quicker and use less disk space on your computer.
• Added ‘Original Video Time’ on instance player (via timeline, matrix, find, code window), database and playlists to provide more context about when the moment occurred in the game. This value is also present in the playback floating controller in fullscreen mode.
• Added the ability to show or hide Instance Text when using the “Columns” button in the sorter, including a checkbox to show or hide all columns.

What did we fix?

• Fixed an issue where Sportscode could crash when cancelling a download in ‘Open from Exchange’.
• Fixed an issue that prevented editing row names on a timeline, during a live capture session.
• Fixed an issue where Read-Only code windows were able to be edited.

Hudl Sportscode 12.2.47

Matrix

• A custom matrix can now be created using complex label queries and applied across different data sources. When a matrix is applied to any open timeline or database, the row names (codes) will be updated to reflect the new data source while labels remain unchanged. Custom label queries can now be created in a matrix using AND/OR/NOT operations.

Database

• To make databases equipped with latest framework changes, an upgrade has been carried out. Older versions of Sportscode will be prompted to upgrade when opening a database file that has been opened in this version.

What did we improve?

• Hudl Sportscode added support for SDP feeds in IP capture.
• When editing an instance note in a sorter, tab+control can now be used to commit the change and move to the next clip with the edit note field ready for editing. Similarly, the Shift+Tab+Control hotkey can be used to move to the previous instance note.
• Added support in sorter to show ellipses to identify when multiple labels are present in a cell.

What did we fix?

• Fixed an issue that caused the play and edit mode icons on slides to not display correctly on MacOS Big Sur.

Hudl Sportscode 12.2.46

Sorter

• Added the ability to show or hide all columns when using the “Columns” button in the sorter.
• Improved adding instances to an existing sorter with hidden columns. Now when the new instances are added, any columns that have been manually hidden will remain hidden. Older versions of Sportscode will be prompted to upgrade when opening a Playlist that has been opened in this version.

What did we fix?

• Fixed an issue that caused the exported video from a certain arrangement of playlist clips and slide to result in 1080p resolution, rather than 720p.
• Fixed an issue where effects did not pause in playlists, if the effect was present at the beginning of the playlist.

Hudl Sportscode 12.2.45

Hudl League Exchange

You can now download video and data from Hudl League Exchange from within Sportscode. In Sportscode, go to File > Open from Exchanges, and log in with your Hudl account details to get started. Access to this feature depends on your Hudl subscription - contact your account manager for more information.

What did we improve?

• Reference playlist icons (white) and standalone playlist icons (blue) now have different background colours to help differentiate playlist types in the Finder. It is important to restart the machine after updating for this change to take effect.
• Clips are now sent from a matrix to an organiser in chronological order.
• The esc key can now be used when renaming a label group in sorter to exit edit mode and revert the name to the original state.
• Resize handles on effects in playlists now include a black border so they will remain visible regardless of the slide or clip background colour.

What did we fix?

• Fixed an issue with Opta Football import where Corner data was not correctly imported.
• Fixed an issue where overlapping text appeared while editing the label group name in a sorter, in a specific scenario in Dark mode.
• Fixed an issue with the Limit scripting command, that did not output the correct result, in a specific scenario.
  

Hudl Sportscode 12.2.44

The 13" M1 MacBook Pro is now supported as a Review machine for Hudl Sportscode. For more information regarding our computer recommendations, see our support page.

What did we improve?

• Improved user experience by saving the playlist before sending any clip to Studio, to avoid any issues related to an unsaved status in the playlist.

What did we fix?

• Fixed an issue where an empty overlay text bar was displaying on slides when exporting from a Playlist.
• Fixed an issue for standalone playlists uploaded to Hudl.com, where few frames from the previous clip were seen as the initial frames of the next clip.
• Fixed an issue where the length of a row name could not be extended manually in an organizer.
  

Hudl Sportscode 12.2.43

Code Window Source Selection

• Code and output windows can now be executed in Report mode from unopened sources similar to the Find window, including all timelines in a folder or a custom selection of timelines.

STS Datahub API

• The STS Datahub API is now available, allowing Bundesliga and Bundesliga 2 teams the ability to import live and post game data directly into the timeline. This import supports Hudl Sportscode timeline configuration, so the data can be customised when added to the timeline.

What did we fix?

• Fixed 2 crashes related to inconsistently occurring scenarios during coding sessions.
• Fixed an issue that caused a brief sound at the transition of slides, when exporting a playlist.
• Fixed an issue with a scripting command ‘Overlap_length’ that did not give the correct result.

Hudl Sportscode 12.2.42

What did we improve?

• Improved user experience by making the playlist, database and edit labels window inspector show the notes section, even if there is large data present in the labels section

What did we fix?

• Fixed an issue where a Video and its Sportscode XML data were misaligned when downloading via ‘Open from Hudl’.
• Fixed an issue where codes in the timeline would not update instantly after completing a find and replace action.
• Fixed an issue where notes added on playlist clips did not get sent to a database correctly.
• Fixed an issue that caused the Hudl remote rewind key to not rewind the playhead in a playlist, if drawings were present in a specific order.

Hudl Sportscode 12.2.41

Studio

• We’re excited to launch Studio, our new advanced, easy-to-use telestration solution. Hudl Sportscode users can now quickly add professional, dynamic drawings and graphics to multiple angles in your video packages, all within one ecosystem of products.
• Studio is available via the Sportscode Elite license, and is currently optimised for global football. You can download it here.
• Click here for an overview, here to access our “Getting Started” course on Hudl Academy, and here for support resources.

What did we fix?

• Fixed an issue where the drag handle upon pressing option + command + caps lock keys only appeared after mouse click and drag.
• Fixed an issue that caused Champion Data import to timeout on a few older machines.
• Fixed an issue related to code window buttons moving vertically downwards, upon opening a code window on macOS BigSur.
• Fixed an issue of not being able to move a clip down in a Movie Organizer, without first dragging left or right.
• Fixed an issue where text overlapped on top of existing text while editing a column name in a sorter, in a certain scenario.
• Fixed an issue where clicking on the angles tab in the playlist inspector caused the video keys to not work correctly.
• Fixed an issue that caused the code window button links to not show correctly, on macOS BigSur.
  

Hudl Sportscode 12.2.40

What did we improve?

• Added the ability to filter instances that are received in Hudl Sportscode and Replay during live sharing when using a live data import with a custom timeline configuration file.
• Added the ability to merge overlapping instances from a timeline row into a single instance via a new menu item (Edit > Instance or Clip > Merge).

What did we fix?

• Fixed an issue that caused an instance note to not get added correctly if the notes window was still open and a new instance was added to the timeline.
• Fixed an issue that caused few scripting commands to update after a delay.
• Fixed an issue where overlay text could display in a playlist after deleting clips when no clip was selected.
• Fixed a crash that happened on a specific package while converting a v11 package.

Hudl Sportscode 12.2.39

What did we improve?

• Added the ability to split clips in playlists. Synchronizing this change back to the source timeline is also supported.
• Added support to find and replace text strings of button IDs, button scripts, inactive buttons in a code window.
• Improved timeline playback performance by supporting a smoother playback experience with greater than 2.00 speed.

What did we fix?

• Fixed an issue that prevented some .MTS files from importing successfully.
• Fixed an issue where an edited clip in standalone DB ended in non-alignment between clips when exported to a new video package.

Hudl Sportscode 12.2.38

macOS BigSur

• Click here for an important announcement regarding macOS 11 BigSur.

What did we improve?

• Added few new fields in Champion data import to give similar import result as Sportscode v11.
• Improved scripting performance for a few commands.
• Added the ability to add flag to an instance from an action button in an output window sourced by custom selection.
• Added the functionality to search, find and replace codes, labels or a label group in a code window.

What did we fix?

• Fixed an issue where a new playlist would lose the video link to the source package, if the source was moved to another location on the same machine.
• Fixed an issue where sorting did not correctly sort the values when labels included text and numbers together, in a sorter.
• Fixed an issue where instance text did not get exported from a playlist, if instance text display was turned off during export on another playlist.
• Fixed an issue where dragging clips to an empty sorter did not add the clip to the playlist.
• Fixed an issue that caused a captured video package to not open correctly, if it was not closed after stopping the capture.
• Fixed an issue where an ungrouped label would not be added correctly if there was a same named label group already present in the sorter.

Hudl Sportscode 12.2.37

Hudl Replay with Hudl Sportscode

• Improved new discovery mechanism between Hudl Sportscode and Hudl Replay which will enable us to troubleshoot issues more effectively as well as innovate with new features faster.
• Security is now baked into Session discovery, so when you log in to your Hudl Account (from Hudl Sportscode), any capture sessions you create can only be discoverable by members of your team.
• Improved video latency between devices when live sharing for both IP and local capture.

What did we improve?

• Improved performance of transferring video from sharing to viewing machine during a live capture session in Hudl Sportscode.
• Added an error prompt to guide the user when creating a reference database from a reference playlist generated from a standalone database.
• Added additional Ruck OOA and Substitution data to the Opta Rugby Import. Matchtime data can also now be included when using a custom import configuration file.
• Added the ability to view search results in an instance player or send to other component when using the Find and Replace feature on labels and label groups from the front timeline
• Added support to edit the duration of an instance on a timeline with option + command keys and dragging the mouse, while caps lock is enabled.

What did we fix?

• Fixed an issue where reference playlist clips showed as missing, if saving the standalone playlist was cancelled.
• Fixed an issue where flagging on an instance player did not show the label groups in the columns in a sorter.
• Fixed an issue where exporting from a package captured in Mojave could cause the audio to be out of sync.
• Fixed a few strings related to translations.

Hudl Sportscode 12.2.36

What did we improve?

• Playlists opened and edited in this version cannot be opened in previous app versions. It is recommended for users to be on the same 12.2.36 to facilitate sharing.
• Improved user experience by displaying the number of instances found after a Find and Replace search.

What did we fix?

• Fixed an issue during live capture that caused playhead to jump back in certain scenarios.
• Fixed an issue that caused an undefined row to be created, when champion data import included “Centre Bounce Throw Up” in the file.
• Fixed an issue that caused instances to get unaligned with tagged moment using Edit > Live scenario, in certain scenarios.
• Fixed an issue that did not sync back changes from playlist back to the timeline, in certain scenarios.

Hudl Sportscode 12.2.35

What did we improve?

• Added the ability to send clips from playlist to database. Sending clips from standalone playlist to reference database is not supported for now.
• Added new information to the code view inspector in databases, “Original instance” which displays the instance row name and number from the source timeline. This change cannot open databases in previous app versions, therefore it is recommended for users to be on the same app versions.
• Improved behavior to retain the selection of an instance during a live data import when the timeline updates with new data.
• Added the option to cancel the process to dismiss the window if video fails to download via Open from Hudl.
• Added capability to search and replace label and label groups in the front timeline with new text. The ability to view these returned results in an instance player or send to other components will be added in future releases.
• Added the ability to include new data (distance to goal, angle to goal, pressure, amount of defenders, goalkeeper distance and xG) in the DFL data import with a custom import configuration file.

What did we fix?

• Fixed an issue that caused incorrect clip duration when sent to database, if the clip had been edited in a playlist earlier.
• Fixed an issue that caused instances to get out of sync from the tagged moment in specific conditions, during fullscreen coding.
• Fixed an issue that caused the mouse to drag with the playhead even if keys were lifted off, in certain key combinations such as command+option+click and drag.
• Fixed an issue where package names would not display correctly in the Find window in certain scenarios

Hudl Sportscode 12.2.34

What did we improve?

• Added support in Find window to replace text in codes of the front timeline, to improve user experience and efficiency of changing codes in a timeline.
• Instance text within a playlist now resizes to maintain the proportion in the video player window so that text is now visible when presenting on high resolution external displays.

What did we fix?

• Fixed an issue in Playlists that caused a flickering display for specific videos on macOS Mojave machines.
• Fixed an issue where the option to Live Share an instance was disabled, when accessed from the Edit menu item while player window was in focus.

Hudl Sportscode 12.2.33

What did we improve?

• Implemented a few changes in live share to make it a smoother experience with better latency between sharing and viewing machines.
• Improved code mode tagging sessions by having instances get tagged on the front timeline, rather than always appearing on the live capturing timeline.
• A new webpage is now available to help with Scripting feature, via Help->Scripting menu item.

What did we fix?

• Fixed an issue that caused the row color to not get updated, after cells were sorted, in certain scenarios in a sorter.
• Fixed a crash that was caused by renaming a code button, in certain scenarios.
• Fixed an issue that meant un-sharing an instance during a collaborative coding session would remove the Instance from the timeline of both the primary & viewing HSC machine.
• Fixed an issue where the DFL Raw Event import would not import correctly immediately after a game.

Hudl Sportscode 12.2.32

Find

• Find window custom selection adds the ability to choose a custom selection of timelines from different packages and locations for analysis.

What did we improve?

• Added a new column to the sorter “Original instance” which displays the instance row name and number from the source timeline.
• Added capability to control video with hotkeys of up, down, left right arrow keys and modifier keys to playback, move scrubber ahead and back, while editing instance notes in sorter.

What did we fix?

• Fixed an issue that caused drawings to not show at the correct times in a Playlist when uploaded to Hudl.com, in certain conditions.
• For better comprehension, removed the decimal point shown in code windows lead and lag time fields default value.
• Fixed a crash where data containing special characters was being filtered in the Find window search query.

Hudl Sportscode 12.2.31

What did we improve?

• Improved ability to align data during data import by keeping the reference point as the start time of the first instance, rather than mid-point of the first instance. Align Right and Align All, on the timeline toolbar and menu items, will also take the start time of the first instance as the reference point to change alignment.

What did we fix?

• Fixed an issue that caused the output windows to not update correctly in certain scenario on the viewing machine if sharing machine changed labels from the existing instances.
• Fixed an issue in the DFL import where own goals or goals scored from set-pieces were not displaying correctly.
• Fixed an issue in Opta import where an import would fail in a certain scenario.
• Fixed an issue that didn't let the user edit notes to add empty notes in sorter, in a certain scenario.

Hudl Sportscode 12.2.30

Live Data Optimization

• You can now configure which instances are shared live to other devices running Sportscode or Replay. You control this via the new Live Sharing tab in the Code Window inspector, and you can modify the sharing status of coded instances via row and instant context menus on the Timeline, as well as a Live Sharing button at the bottom of the Timeline.

Find

• Significantly improved performance for Find window to search through large data across multiple timelines and folders. Results are now returned up to 30x faster.
• Added an option to include sub-folders when searching an entire folder using the Find window.

What did we improve?

• Improved rewind button on Hudl Remote and fast rewind on player controls to progress past the current clip when multiple clips are selected.
• Row name of a slide can be edited now and the new row name will be retained when sending to other Playlists.
• Letters used in flagging hotkeys can now add flags, regardless of caps lock on or off on the machine.
• Instance adjustments are now supported with command+control+Z hotkeys to drag all instances to a certain location on the timeline. Command+control+X can also now be used to drag all instances to the right of the playhead. If adjusted during a live sharing session, these instances get adjusted on the live viewing machine too. Keyboard shortcuts for Align all and Align right in the timeline are now option+z and option+x to so that they do not conflict with the new instance adjustment keys.
• Improved playback experience for some playlists that were causing glitches in fullscreen playback.

What did we fix? 

• Fixed an issue that caused the instance sequence number of rows in a sorter to be incorrect, in a certain scenario.
• Fixed an issue that caused code windows with certain scripting commands, to take focus and come in the front whenever there was a change in timeline data.
• Fixed a crash related to moving rows on the timeline, that occurred in specific conditions.

Hudl Sportscode 12.2.29

Note that Hudl Sportscode does not yet support macOS BigSur. For more information on macOS version support, click here.

What did we improve?

• Improved timeline player to retain its position above the timeline window, when switching between single and multi-angle views.
• Sorter rows can now only be selected and reordered by selecting or dragging from the sequence number column.
• Added an icon in sorter to reflect the presence of a slide.

What did we fix?

• Fixed an issue where the instance duration could not be adjusted correctly using the command+option hotkeys on a live capturing timeline.
• Fixed an issue where certain clips from packages could not be saved in a standalone playlist or database.
• Fixed a crash in timeline ruler when zoomed in and out, in a certain scenario.
• Fixed an issue that caused the instance sequence number of rows in a sorter to be incorrect, in a certain scenario.
• Fixed an issue where an unexpected clip got selected, after a slide was inserted in sorter. Now, the newly added slide will stay selected.
• Fixed an 'Open from Hudl' issue where losing internet connectivity whilst scrolling through videos would cause the 'unable to load more videos' message to repeatedly open and close.
• Fixed an issue where black video would be displayed on a new standalone database. This would happen when sending instances from a matrix, that was launched from a standalone database, to a new standalone database, that is then given the same name as an open reference database.

Hudl Sportscode 12.2.2

Legacy Movie Organizer Conversion

• Hudl Sportscode now supports Movie Organizers from Sportscode Classic to be converted into standalone playlist files in Hudl Sportscode. The files can be converted into Hudl Sportscode playlist format by a menu item File - Convert From Legacy > Movie Organizer.

 Find Window

• Hudl Sportscode now supports searching for instance notes in timelines via Find window.

What did we improve?

• Added an option to pause after each clip in a Playlist or instance in a Database.
• Improved local capture by giving an option to not select an audio source for capture. ‘No Audio Sources’ can now be chosen from the audio sources.
• Clip sequence number in a sorter shall remain visible at all times during vertical scrolling, to improve user experience.
• Added the ability to include the label group when using the “Add Label ” scripting command. 

What did we fix?

• Fixed an issue where wrong season data prevented users from accessing Hudl Library to open video packages from File→Open from Hudl.
• Fixed an issue where uploaded playlists to Hudl.com showed a few video frames from the previous clip or slide.
• Fixed an issue that showed incorrect values for imported data on video packages, for specific instances that were present before the starting time of the video.

Hudl Sportscode 12.2.27

Legacy Sorter Conversion

• Hudl Sportscode now supports sorters from Sportscode Classic to be converted into standalone playlist files in Hudl Sportscode. The files can be converted into Hudl Sportscode playlist format by a menu item File > Convert From Legacy > Sorter.

What did we improve?

• Added support for Opta Football data import for new season, to correctly import player data. 
• Databases now work as expected on exFat format hard drives.

What did we fix?

• Fixed an issue where aligning angles in packages, with multiple video files, was causing unexpected alignment for first and second halves of the game.
• Fixed an issue that caused effects to not get exported correctly from the visible angle in a playlist. 
• Fixed an inconsistent crash that caused playlists to crash on being opened, after a certain workflow related to Titles.
  
• Fixed an issue that caused the database player to go back to the beginning of the clip, if a label was added in label mode when a database was in Sorter view.
• Fixed an issue in multi-angle playlists where an effect could still be added in multi-angle view, in a certain scenario.
• Fixed an issue during edit mode in playlists, by not pausing or displaying effects during edit mode now. Effects and annotations shall continue to appear and can be created, like before, during play mode.

Hudl Sportscode 12.2.26

What did we improve?

• Added support to copy slides and clips between playlists by dragging them to the new playlist
•  Added functionality to send slides between playlists through toolbar ‘Organizer’ and ‘Sorter’ icons
• Added hotkeys for a few menu items; Import, Export and Edit.
• Added the ability to send instances to new or existing Standalone Databases from the Find window when the source is a Standalone Database.

What did we fix?

• Fixed some issues relating to new season data in the OPTA Football import that caused import failures.
• Fixed an issue that caused the Start Time column to not sort clips correctly in a standalone sorter.
• Fixed an issue that did not correctly reflect a newly added label group in playlists, when sent to a new playlist.
• Fixed an issue where audio kept playing in a certain scenario, after player window had been closed.
• Fixed an issue that caused non-alignment of clips on Hudl.com, when an exported package was uploaded to Hudl.
• Fixed a crash in capture, that occurred under specific conditions.
  

Hudl Sportscode 12.2.25

What did we improve?

• Improved the process for uploading a timeline to an existing video package, by adding a dialog to indicate that data is being processed.
• Added the ability to send instances to a new or existing Reference or Standalone Databases from the Find window when the source is a Reference Database.
• Added functionality to cut, copy, paste slides with images between standalone and reference playlists.
• Improved sharing to Hudl Sportscode and Replay when the capture source is an RTP feed.
• Added support for Opta files for current season and multi-leg games, that were giving errors.

What did we fix?

• Fixed an issue that caused mute setting to not disable audio in certain scenarios.
•  Fixed a crash that was caused by typing an incorrect IP feed address, in a certain workflow.
• Fixed a crash that was caused by opening timelines with incorrect data.
• Fixed an issue that caused game clock to show incorrect time format in label data, in a certain workflow.
• Fixed an issue where pasting a clip in an empty row in organizer was not possible
  

Hudl Sportscode 12.2.24

What did we improve?

• Uploading a timeline to an existing package has been removed from behind a feature toggle. This is available based on subscription level.
• Clips and slides can be cut, copy, pasted between different reference playlists.
• Added functionality to copy and paste slides with images between playlists.
• Improved sharing to Hudl Sportscode and Replay when the capture source is an RTP feed
• Added support on Hudl remote “Full” button to launch fullscreen for a player.

What did we fix?

• Fixed an issue that caused Playlists to not display correct clip lengths when uploaded to Hudl.com.
• Fixed an issue where the video would not display correctly on Hudl.com when uploaded from multi-angle packages.
• Fixed an issue in sorter where notes could not be edited after adding slides.
• Fixed an issue in sorter that caused duplicate notes to be added to slides, in a certain scenario.
• Fixed an issue in sorter which did not send the expected clips to sorter, if both clips and slides were attempted to be sent.
• Fixed an issue with the Sportscode xml export encoding to more closely match the Sportscode V11 export

Hudl Sportscode 12.2.23

Playlist

• Standalone Playlists now indicate with a prompt when opened if there are any missing videos. Those clips are highlighted in red, and it is recommended to remove them and re-add them to the to playlist.

Database

• Multiple angle audio controls are now supported in Databases. Both video and audio angles can now be set independently and globally for a Database.

What did we improve?

• Drastically improved the performance of slides in playlists, including transitions to a slide and between slides, that is particularly noticeable on high resolution or Retina displays.
• Fixed an issue that caused delays in sharing video in a live share workflow, from a Catalina sharing machine.
• Added functionality to cut, copy and paste slides and clips within reference sorters. Undo can be performed on this action.
• Undo and Redo is now supported in a Sorter in multiple operations.

What did we fix?

• Fixed an issue that caused errors in Champion data import, due to timezone differences.
• Fixed an issue that caused the name of the button to appear in white during edit mode, when in dark mode setting on the machine.
• Fixed two issues in standalone playlists that caused black video if shared with another machine. Black (missing) video was resulting from copy pasting clips and sending slide+clip combination to standalone playlists.

Hudl Sportscode 12.2.22

What did we improve?

• Improved playback performance in playlists where audio was not correctly synced with the transition between clips, slides and titles.
• Sorter columns, including the notes column, can now be resized to any width.
• The size and location of the Playlist window is now retained when opening and closing Playlists.
• Instance player generated from find, matrix and output window will now retain the chosen angle in the player when moving between instances.

What did we fix?

• Fixed an issue that caused some older v11 packages to not be converted in Hudl Sportscode.
• Fixed a crash that was caused by showing and hiding columns in a sorter, under a certain scenario.
• Fixed few other inconsistent crashes including a crash in the timeline ruler.
• Fixed Opta Rugby data import to improve accuracy with actual coordinates from a rugby pitch and include lineout numbers.

Hudl Sportscode 12.2.21

What did we improve?

• Clip level audio controls are now supported in playlists. Both video and audio angles can now be set for each clip.
• Location and size of the playlist set by the user is retained by Hudl Sportscode now, even after relaunching the app.

What did we fix?

• Fixed an issue that caused the drawings to be exported on incorrect moments, from video export and upload to Hudl workflows.
• Fixed an issue where a reference playlist was not correctly sending clips to a standalone playlist, thus ended in missing video in the standalone playlist. This issue was typically visible only once the source reference video was not available

Hudl Sportscode 12.2.20

What did we fix?

• Prevented an issue that caused blank video when sending clips from Find window, in a certain scenario.

Hudl Sportscode 12.2.19

What did we improve?

• An error message is shown when a v11 reference package conversion to Hudl Sportscode is not able to locate the source package.
• Sorter now supports the scrollbar to automatically move to the clip which is being played. This auto-scrolling is also supported with tab and shift-tab to move through the clips.
• Added feature to show and hide rows from organizer.
• You can now send Find Window results (instances) from a single (or multiple) timelines to a reference or standalone database.

What did we fix?

• Fixed an issue where angles could not be aligned correctly incase a new angle was added to the package, in a certain scenario.
• Fixed a crash caused on zooming into the timeline, in a certain workflow.

Hudl Sportscode 12.2.18

Playlist

• Playback mode controls added to the Playlist. Users can select to loop individual instances or a selection of instances instances from the new playback control icon added to the playlist player.
• Added controls to show or hide instance text from being displayed in the Sorter. This is possible for label group and flag columns from the context menu on the column, ‘Hide From Instance Text’.

Database

• Added the ability to flag from find window when it references a Database.
• The new video export user interface with additional controls has been introduced for video exports from the database. Users can now choose to export single or multiple angles from an entire database or a selection of clips. This also includes controls to export as individual movies, individual movies per row or a single movie.

Legacy Conversion

• Added support to convert legacy Gamebreaker Plus packages to Hudl Sportscode.

What did we improve?

• You can now send instances to a new or existing Standalone Database when you open a Matrix from a Standalone Database.
• Added ability to edit color of a clip in a sorter.
• Added ability to edit row color and name via a context menu in an organizer.
• Improved UI for audio muting controls added to the instance player.
• Improved the progress bar for sending clips to a database.
• Opening multiple timelines package now remembers the last opened timeline and highlights it, to help find the last opened timeline better.
• During live sharing the last chosen folder location to save the viewing package is now remembered.

What did we fix?

• Fixed an issue where Live Sportscode XML could scroll the timeline to the top row, on every update in data.
• Fixed an issue where v11 reference packages could not be converted on macOS Catalina. v11 reference packages can be converted to Hudl Sportscode packages if the source v11 package are located in the same folder as the source video.
• Fixed a crash related to empty labels being tagged onto the timeline
• Fixed an issue where same named rows coming from different timelines to a database would create duplicate rows in matrix or when sending selected instances to a video package.
• Fixed an issue where instance text border was showing on exported slides and titles in playlists, in certain scenarios.
• Fixed a crash where a 0 length video would cause the timeline to crash, in a certain scenario.
• Fixed an issue where Sportscode XML failed to import files with empty row names.
• Fixed an issue that caused live XML import to not work for Champion Data.

Hudl Sportscode 12.2.17

Database

• Databases can now be switched to display in Code View. The code view of a database includes support for instance adjustments, the sorting, renaming and moving of rows, zoom controls, the ability to delete instances and undo actions.
• Playback mode controls, users can select to loop individual instances or loop a selection of instances from the new playback control icon added to the database player. Watch a demonstration.
• Labels mode can be enabled in code windows to add labels to instances in a database.
• Angle selection in a database is now maintained when moving between instances in a database.
• Click here to learn more.

Video Exports

• A new video export user interface with additional controls has been introduced for video exports from the playlist, timeline and instance player. Users can now choose to export single or multiple angles from an entire playlist or timeline or a selection of clips or instances. This also includes controls to export as individual movies, individual movies per row or a single movie. Find out more here.

Edit labels window

• Edit labels window can now be accessed via menu item ‘Edit -> Instance Labels’ or shortcut key, to view and edit labels on a selected instance in the timeline. See a tutorial here.

Flagging

• Flagging from the Find window on timelines is now supported. This includes the ability to flag to a playlist or add instances notes. This behaviour is also supported across multiple timelines where the timelines are not currently open.

Data Import

• DFL import is now supported in Hudl Sportscode. This import has also been improved to provide additional information that was not available in Version 11, watch here.

What did we improve?

• You can now send instances to any other Database when you open a Matrix from a Reference Database.
• Organizer now displays the original row name and instance number referencing the timeline it was created from.
• New label group columns can be added and renamed in sorter.

Hudl Sportscode 12.2.16

What did we fix?

• Fixed an issue that caused a black screen in fullscreen on playlists, in a certain scenario

Hudl Sportscode 12.2.15

Combine Timelines

• Combine Timelines feature is now available in Hudl Sportscode. Data and video from multiple packages can now be combined into a single, standalone, Hudl Sportscode package. See a demonstration here.

Playlist

• Playlist layout can now be switched between two views to change placement of the data, Data Below or Data Right.

Pause Capture during Live Capture

• Resolved issues relating to Pause capture to enable both the capture and sharing to be resumed if capture is paused during breaks in play. This includes disconnection of the capture device, removal of network connections or putting the capturing Mac to sleep while capture is paused

Database

• You can now send instances to a Sorter or Organizer when you open a Matrix from a Database.

Data Import

• Added ability to import Champion data into Hudl Sportscode.

What did we improve?

• Added the ability to choose whether to merge overlapping instances on import for third party data imports.
• Labels can now be added or removed on instances in timeline by using the command key when in the contextual menu.
• Playlists generated from databases, can sync changes back to databases by the Synchronise button. Previously this feature only supported syncing back from playlists generated from timelines.
• Changed Sidebar toolbar button to Inspector button on the playlist.

What did we fix?

• Fixed a crash that was caused by using auto sorting rows and ‘Populate codes in Timeline’ option in a code button together during capture.

Hudl Sportscode 12.2.14

macOS Catalina

• For an announcement about macOS Catalina support click here.

Database

• Added functionality to trim and extend instances in databases using drag handles in Edit mode.

Matrix

• You can now send instances to a Sorter, Organizer or Database when you open a Matrix from a Timeline.

What did we improve?

• When we save a Matrix, we now also store whether axes were swapped or not.
• Added the ability to choose whether overlapping instances should be merged on import for Sportscode xml and live Sportscode xml imports.

What did we fix?

• Fixed an issue where editing a clip from playlist caused the effects to disappear from the clip, in certain scenarios.
• Fixed an issue where Group Labels may appear cropped or empty when dragging Labels in the Matrix.
• Fixed an issue where matrix would not generate video if the source was a reference database that was created from multiple timelines in a package.
• Fixed an issue where trimming or extending the first instance on a timeline, falling close to the starting time, caused an unexpected behaviour.
• Fixed an issue in the code window inspector for Gambreaker Plus users, where the hotkey field was not displayed
• Resolved an issue relating to RTP capture, in certain scenarios

Hudl Sportscode 12.2.13

Multiple Timelines in Packages

• Hudl Sportscode now supports multiple timelines inside packages. New timelines can now be added from selected instances using the menu item or toolbar icon.
• Where multiple timelines exist in Sportscode V11 packages, these will now all be converted into the Hudl Sportscode package.
• Find window search results have been updated to also include timeline name.
• The default timeline in a package will now be created with the package name rather than "Timeline.
• When packages containing multiple timelines are saved on a server, multiple users can now access and edit different timelines within the same package simultaneously. See a tutorial here.

Code Window

• Live notes can now be added to instances via a code window using menu items or keyboard shortcut (Elite and Elite Review only). Find out more here.

Matrix

• You can now swap the axes on a matrix.

Database

• Strip contents (labels, notes and flags) feature is now available in databases.
• Undo and redo operation can be done after stripping contents to undo or redo the operation.

Flagging

• Added functionality to allow flagging on video generated from action buttons in code windows operating on timelines.
• Flag with notes now pauses the video to give the user time to enter a note.

Data Import

• Added additional data to the Opta Rugby Import and created a start period row with instances to mark the start of each period for easier alignment.
• Enhanced Opta Rugby and Opta Football imports by providing improved color sorting and differentiation for Player and Team rows.

What did we improve?

• Improved performance of slides in playlists that caused large images to take a longer time to display during playback.

What did we fix?

• Fixed an issue where output windows from a database would not get triggered to give correct results, in certain scenarios.
• Fixed an icon in code window inspector that didn’t appear correctly in dark mode.
• Fixed an issue where saving a reference playlist prompted an error. Now, reference playlists can be saved as standalone playlists.
• Fixed an issue where ‘Populate code in Timeline’ from code window inspector didn’t work during capture mode, in a certain scenario.
• Fixed an issue where zoom in/out keys did not work on a timeline for keyboard with specific settings.
• Fixed an issue where two labels could not be added to the same label group for a clip in database.

Hudl Sportscode 12.2.12

What did we fix?

• Fixed an issue where Upload to Hudl from timeline, for multiple angle packages was not showing all angles on Hudl

Version 12.2.11

What did we improve?

• Upload of playlists to Hudl has been improved. Single angle playlists now support uploading of titles, slides and effects. Playlists containing multiple angles can also now be uploaded and supports titles and slides.
• You can now double click on any row, label, label group or total to launch the instance player.
• You can now browse your entire library and not just the last 100 videos. Scroll to the bottom of the list to load older videos.
• Database will now maintain clip numbers in a sequential manner per row (code), rather than showing the original clip number with respect to the source timeline.
• Added functionality to trim, extend, mark start and end time to clips in a database with hotkeys and ‘Edit -> Instance or Clip’ menu item.

What did we fix?

• Sportscode XML now supports special characters and shows these characters correctly now in the exported xml file.
• Fixed an issue where the first default angle in a playlist was re-enabled in the Playback tab, after sending new data to the playlist, in a certain scenario.

Version 12.2.10

What did we improve?

Strip contents from Instances and Clips

• The Strip contents (labels, notes and flags) feature is now available in Hudl Sportscode. Contents of instances from timeline and clip data from playlists can now be deleted with menu item, Edit->Instance or Clip-> Strip Contents.
• Undo and redo operation can be done after stripping contents to undo or redo the operation. Learn more here.

Access to Playlists

• Added support to work on playlists saved on a server and some non-apple formatted external hard drives.

What’s Fixed

• An issue where some exported videos would appear to have a slow motion section in Quicktime player, for certain video packages.
• An issue where the exported video appeared to be larger than the expected duration, for certain video packages.
• An issue where export operation would halt midway during the export, for certain video files.
• An issue where export from a playlist containing slides and titles would take a longer time than expected, in certain scenarios.

Version 12.2.9

What did we improve?

Fullscreen Coding

• Hudl Sportscode now supports fullscreen coding. Ability to tag instances from hotkeys and code window buttons has been added to work during full screen playback in code mode. Find out more here.

Access to Video Packages on Server

• We’ve added support to work on video packages saved on a server and some non-apple formatted external hard drives.

Databases

• We’ve added flagging for databases.

What did we fix?

• An issue where Capture Preset appears truncated on the capture inspector.
• A few issues related to translations.

Version 12.2.8

What did we fix?

• An issue that caused a black video upon saving a standalone playlist.

Version 12.2.7

What did we improve?

Export Video Package

• You can now create a video package from selected instances in a database or video package! This gives you a way to perform all standard timeline operations on your database, including adding labels in label mode, coding in code mode, and editing instances. It also allows you to remove dead time from a video package. Access this new feature via the File->Export->Selected to Video Package menu item, with either a database or video package in focus. Learn how to use this new feature here.

Data Exports

• You can now export data from a timeline, playlist or matrix to a CSV file, and use this data in spreadsheet or data visualisation applications. Access this functionality via the File->Export->CSV File menu item. Learn more about this feature.

Other Languages

• Hudl Sportscode now supports Turkish.

What did we fix?

• An issue which caused adjacent instances in a timeline to be merged, when using the New Merged Row feature, or when duplicating instances.
• An issue which occurred when clicking a hotkey for a non-existent angle, which caused the timeline playhead to stop moving.
• An issue which occurred when exporting a video from a video package or database with angles of different durations.
• An issue which occurred when exporting video from a standalone playlist.

Version 12.2.6

What did we fix?

• An issue where standalone playlists created from standalone databases would show a black video for clips.

Version 12.2.5

What did we improve?

Download and Open a Video from your Hudl Library

• You can now use Hudl Sportscode to down­load video from your Hudl library. Access this new feature by clicking File > Open from Hudl. Check out all the details, including a demonstration, here.

Standalone Playlists 

• Save your playlists as a stand­alone file, which don’t need the orig­i­nal source files to play. Learn more about how to use this new feature.

Other Languages 

• Hudl Sportscode now supports Japanese, Spanish, Portuguese (Brazil), Korean, Chinese Simplified, Italian and Greek, as well as U.K. English.

Frame rate

• When capturing from a local device (i.e., AJA U-TAP, Blackmagic or others), you can now select the frame rate from the inspector window. For best capture quality, it’s recommended to select the same frame rate as the source video. 

What did we fix?

• A bug in playlists where angle information went missing from the Playback tab.
• A bug that prevented playback hotkeys from working on a database if the video player wasn’t selected.
• A crash issue when exporting a report for Sportstec Player from the timeline.

Version 12.2.4

What did we improve?

Translations

• Hudl Sportscode now supports German, Russian, Portuguese (Portugal) and Dutch

What did we fix?

• An issue in Matrix that caused the labels to disappear upon scrolling through the data

Version 12.2.3

What did we improve?

Translations

• Hudl Sportscode now supports French.

Scripting

• Further improvements to scripting performance in complex code windows, beyond those seen in the last release.

What did we fix?

• An issue that caused clips video to be ordered incorrectly, when generated from an output window executing on a database.
• An issue with exporting overlapping instances with instance text that produced unexpected exported video.
• An issue which caused a crash when importing some Synergy packages.

Version 12.2.2

What did we improve?

Scripting

• We've made significant improvements to scripting performance in complex code windows.
  

What did we fix?

• A crash that was being witnessed for a particular audio setting in custom preset in capture.
• An issue that caused the playhead to jump at the start of the timeline, upon initiating fullscreen display.

Version 12.2.1

What did we improve?

Video Import and Export

• You can now export video from an instance player in a matrix generated from database and video generated from code window action buttons. We’ve also added ability to include effects, slides and titles when exporting a playlist.

Playlist

• Added ability to relink clips to missing databases, when transferring playlists between computers

What did we fix?

• An issue where angle numbers did not update correctly after deleting earlier angle numbers in Import -> Video…
• A crash which was seen after deleting a flag, in a certain scenario.
• An issue where the instance player was not in chronological order, when generated from matrix.

Version 12.2.0

What did we improve?

v11 Packages Conversion

• You can now convert legacy video packages (including databases) with multiple video sources to the Hudl Sportscode format.

Playlist

• You can now change the properties of effects, including line color, weight and stroke style, fill colour, and font colour and size. If you add effects while presenting a playlist in full screen, the effects are now telestrated, meaning that the effects are not saved with the playlist, and are not obscured by drag handles. When sending clips from one playlist to another, effects are now sent too. We've also added the ability to relink clips to missing video, when transferring playlists between computers.

Databases

• Output windows on databases now support action buttons to generate video.

What did we fix?

• An issue in the playlist where playback wouldn’t pause at drawing after returning from full screen.
• An issue where a long video package name would overlap other columns content in a sorter.
• A crash that was being seen in certain scenarios in the Matrix.
• An issue where the results from queries could not be clicked in a certain sequence of actions.
• An issue that caused unexpected behaviour when sending very short instances to databases.

Version 12.1.10

What did we improve?

Playlist

• We added an icon in the playlist and database to show which clip is currently playing or being edited. We also added functionality to send clips to a playlist, from a standalone database

Find

• You can now search for instances in a folder of Videos using the find window

Database

• We added functionality to generate a matrix from a database.

Note: Databases created or opened in this version of Hudl Sportscode will not work in previous versions of Hudl Sportscode. Be sure to update Hudl Sportscode on all computers to the latest version.

Video Export

• When exporting a video from a timeline or playlist, the default name is now more useful.

Capture

• For local capture, if camera permissions are not enabled from System Preferences, an error message is now shown.

What did we fix?

• An issue that caused the HD720 preset to not show in the list of presets, upon first launch of a local capture.

Version 12.1.9

What did we fix?

• An issue in the playlist that caused rectangle and ellipse tools to have white color filled in the properties.

Version 12.1.8

What did we improve?

Playlist

• When a single clip is selected in a playlist, playback now continues from one clip to the next. You can also navigate between clips using tab and shift-tab. We’ve added functionality to generate a matrix from a database and synchronise changes from an organiser or sorter back to a source database.

What did we fix?

• An issue that caused the capture preview window title bar to disappear, even if hovering over it.

Version 12.1.7

What did we improve?

Playlist

• You can now add a slide on sorter, through the toolbar icon and menu item. Adding effects on slides, changing background color, deletion, dragging to another row are some of the key features enabled for slides on sorters. Playlist shows an error: if the video no longer exists on the computer. Playlists continue to work if the source video is in the original location, in the same folder as the playlist, in a different location on the same machine after having been created.

Database

• We’ve added the ability to run output windows on Databases. Make video command from Scripting is still being worked on to be supported in this feature.

What did we fix?

• An issue where copy and pasting a clip or slide didn’t paste the effects present on it.
• An issue that did not make the timeline step into a non-growing state on the viewing machine, when the sharing machine had paused capture, in a certain scenario.

Version 12.1.6

What did we improve?

Capture

• Improved performance when launching an instance player during longer multi-angle captures.

Instance Adjustments

• We’ve added the ability to adjust the start time, end time, or both, of selected instances.

What did we fix?

• A playback issue with multi-angle Videos that have been uploaded to Hudl.
• An issue which caused a loss of data when appending a capture to an existing Video, in a certain scenario.
• An issue that prevented you from selecting all clips in a database, when opened for the first time.

Version 12.1.5

This release contains internal changes in preparation for support for macOS 10.15 Catalina. Note that Hudl Sportscode does not yet support macOS Catalina. For more information on macOS version support, click here.

Version 12.1.4

What did we fix?

• A crash related to camera permissions.

Version 12.1.3

What did we improve?

Databasing

• We’ve made user interface enhancements.

Matrix

• There’s now added matrix functionality for Player licenses.

Find

• The find window now shows instance totals for each filter and instance result counts to facilitate more efficient searching. Selecting a timeline or database in the find results now selects all the found instances.

Capture

• Live viewing videos are now automatically defragmented after capture is stopped. The File->Defragment Video menu item is now disabled when defragmentation is not needed

Video Export

• We’ve added the ability to export instance text with video from instance player and playlists. Turn on instance text to enable it.

Data and Video Import

• The File -> Import -> Video workflow now automatically opens the window to select files. The Sportscode XML import now creates rows in the order that instances appear in the file, unless a row order is specified in the file. The Sportscode XML import now works for Sportscode XML files that include an XML declaration.

What did we fix?

• An issue that sometimes prevented some instances from being sent to a database.
• A playlist issue where an extended clip did not show the increased duration correctly.
• An issue which sometimes caused the playhead to enter the red zone and show black frames during capture.
• An issue which caused a Video package to be deleted when cancelling the process of adding a video file to a Video package.
• An issue that showed an error prompt when attempting to overwrite a Video package during a Synergy import.

Version 12.1.2

What did we improve?

Databasing

• We’ve improved the legibility of notes and labels during editing in databases. You can now send clips to a playlist from a reference database. You can generate a matrix from a reference database.

Find

• You can now view instances from the Find window by double clicking them.

What did we fix?

• Issues that caused the playlist and instance player window to appear in front of fullscreen playback, in certain scenarios.
• An issue that caused flagging with notes to not work if the note was not edited.
• An issue with local capture that caused length of capture on sharing machine to not match length of capture on the viewing machine, in certain scenarios.
• An issue where instance player would not show video if a feed drops out during a multi-angle IP capture.
• A crash that was witnessed for certain code windows with scripting.

Version 12.1.1

What did we improve?

Multi-Game Analysis

• We’ve added the ability to skip between cells in a database using tab and shift-tab. The database button on the timeline now sends clips to an open database, or allows you to create a new one. You can now move and hide columns in a database. The visibility and order of columns order is remembered next time you open the database.

Data Import

• Enhanced Sportscode XML import to support timestamps with decimal seconds.

What did we fix?

• An issue where up and down arrow hotkeys did not start/pause playback if instance is selected.

• An issue where video export failed when an instance extended beyond the end of a timeline.

• An inconsistent crash that affected some code windows with scripting.

Version 12.1.0

What did we improve?

Multi-Game Analysis

• Databasing is now available, you can now create standalone and references databases and add instances from video packages. The Find feature is also available, you can search for instances in timelines and databases, view the associated video, and send them to a playlist. Click here for an article with more information about the roadmap for multi-game analysis in Hudl Sportscode.

Collaborative Coding

• Collaborative Coding is now available. You can capture and code on multiple computers, and share video and data live via the File->Edit->Live menu.

IP Capture

• Hudl Sportscode IP capture now supports RTP streams, including the ability to share to other devices, and convert the video for use in Sportscode version 11.

Catalina

• Click here for an important announcement regarding macOS 10.15 Catalina.

Opta Football

• Updated Opta Football import to incorporate changes for the 2019-20 season.

What did we fix?

• An issue which caused jittering when playing 720p video with slides or titles.
• An issue which caused IP captured videos to take a long time to open, especially on external drives. These videos are now automatically defragmented after capture, and packages can be manually defragmented via the File->Defragment Video menu.
• An issue that caused a missing angle in fullscreen playback, during multi-angle capture in some scenarios.
• An issue with alignment of data in workflows where you capture and share single and multi-angle video to other devices.
• An issue which caused the capture preview window to flicker in some scenarios.
• A number of crashes that was being experienced with certain Synergy packages.
• An issue that caused HTML export and video export to not export the complete video.

Version 12.0.2

What did we improve?

Playlist

• You can now share playlists with other team members, by copying the playlist and placing source video packages in either the same folder as the playlist or in the same folder as on the source machine.

Upload to Hudl

• We added a freehand effects tool for playlists and hotkeys for effects tools: Select - S, Ellipse - E, Rectangle - R, Text - T, Line - L, Line with Arrow - A, Line with T-bar - B, Freehand line - F.

Data Imports

• Hudl Sportscode now supports Sportscode XML files from Wyscout.

Flagging

• There’s now the functionality to add notes with flagging from an instance player or playlist. This option can be set from Preferences -> Flagging.

What did we fix?

• An issue that caused text to be illegible in the playlist while editing in dark mode on macOS Mojave.
• An issue that produced a black video on hudl.com, when uploading some video packages.
• An issue that caused a crash when synchronising playlist edits after importing data from an external source.
• An issue that caused timeline row names to be illegible while editing in dark mode on macOS Mojave.
• An issue with live sharing which caused video to stall on the viewing computer.

Version 12.0.1

What did we improve?

Batch Conversion

• Added the ability to batch convert multiple Sportscode v11 packages to Hudl Sportscode format, via the menu item menu item “File->Convert From Legacy…“.

Code window

• Added the auto-save feature to code windows. Note that code windows saved in Sportscode v12 will now only be compatible with Sportscode v11.3.0 and later. Please update to the latest version of Sportscode v11 to ensure backwards compatibility.

What did we fix?

• A playlist issue where copying a drawing from one angle to another caused unexpected behaviour.

Version 12.0.0

Welcome to the new Hudl Sportscode! For more information, visit hudl.com/products/hudlsportscode.

What's new?

• 360 metrics are now available in the new experience Player section of the Hudl Statsbomb platform. Now you can:
  • Visualize on-ball events like LBP and ball receipts in space directly on the pitch, with no coding required.
  • Validate metrics with video by instantly jumping from your data visualization or tables to a playlist of corresponding footage that can be shared to Hudl.com to enrich and validate your analysis.
  • Improve your shortlists by adding 360’s powerful contextual metrics to your Player Scout filters.

Please see explainer video for more information

What's fixed?

• Fixed csv column export behaviour for 360 metrics

• Fixed player filter dropdown flag error

• Event names were not displaying correctly on Explore/Events/Pitch Vis download

• Added metric short-names and metric definition tooltips in the following places:

  • Explore / Player Scout column headers

  • Explore / Team column headers

  • Player / Match Stats column headers

  • Selecting metrics in 'Edit columns' on these tables

  • Player / Radar table

  • When adding metric filters in Player Scout

• Set default team colours for all teams that did not have a default to avoid both showing as red on the race chart and other visualizations.

What’s New?

We have added the following to the Hudl Statsbomb New Experience:

An Attribute Filters section to the Explore/Events and Player/Pitch Visualizations pages, including:

• Renamed the ‘Type’ filter section to ‘Attributes’

• xG slider

• OBV slider

• Play Type dropdown to select whether events are Corners, Free Kicks etc

• Added the Outcome filters to Player > Pitch Vis page

• The Body Part filter is now a multi-select so the user can select more than one body part.

• Removed the Pass Height filter from the Explore > Events page to be consistent with the Player > PItch Vis page.

   

Player's current team  - added the player’s current (latest) team to the table on the Explore/Player Scout page, it is a default column next to player name.  

What’s Improved?

We have improved the following:

• Made the Player Match Stats video accessible to all users which was inadvertently hidden to customers

• The Player Pitch Vis now defaults to show 'Touches' rather than 'All Aerials' as before (this was alphabetically the first metric in the list)

• The API is being moved to an updated and more reliable system, providing a platform to deliver new metrics, models, and innovations to Hudl Statsbomb’s API and analysis platform.

• A small number of country, player, manager and competition names have been updated for greater consistency across Hudl Statsbomb systems. You can access a full list of changes here.

• Improved player metadata means that player height and weight data have fewer null values, providing more complete and reliable profiles.

• match_updated and match_updated_360 will always share the same timestamp, reflecting the last time any match data was updated.

• Fixed a bug in the competitions endpoint so match_available_360 and match_updated_360 now only display dates when 360 data actually exists, giving you more accurate visibility into coverage.

• Kick-off times are now consistently shown in UTC.

• last_updated and last_updated_360 will always share the same timestamp for consistency.

• Fixed an issue with stadium names that previously showed double apostrophes. For example, st. mary''s stadium now appears as st. mary's stadium. A full list of impacted stadium name changes can be accessed here.

• In response to feedback from customers, Event IDs are now deterministic. They no longer change with every re-import.

• We’ve increased the decimal precision in xG and OBV values, with location data shown to fewer decimal places to reflect collection fidelity.

• Due to bug fixes and API improvements, outputs from our OBV and xG models may show small differences, typically within 5% of previous values.

• The team possession model has been improved, fixing several bugs and leading to changes in possession, possession_team and play_pattern. The update defines possessions a bit differently, often breaking play earlier or grouping isolated touches.

• Since some metrics (like possession) are being recalculated, related aggregates such as possession-adjusted tackles and interceptions will also change.

• In the oldest 7% of games, flipped event coordinates may differ slightly, as the updated API no longer uses the high/low fidelity system.

• More goalkeeper events include end locations, using both the event’s start and the shot’s end coordinates.

• More passes are now classified as crosses or cut-backs because passes starting on the boundary of the qualifying areas of the pitch are now included.

• More shots will be marked as 'first_time' as the updated API now includes shots from deadball situations.

• Event timestamps may differ by about one millisecond due to a simpler rounding method.

• There is a slightly different set of carries derived in the updated API compared to previously, with approximately a 1% difference overall.

• Own_goal_for events now have a player_id recorded against the event  - this is the player that scored the own goal for the opposition team. 

• Clicking on the Explore menu now shows a Landing Page, use the tabs to choose the section you wish to explore (Player Scout, Teams or Events).  You can then either:

  • Explore Players from scratch - this takes you directly into the relevant Explore page or

  • Load saved filters which are displayed in the table on the Landing Page.  These are either filters you have saved previously or those that have been shared with you by colleagues.  New saved filters will automatically show here. 

• Added the 'Switch to Classic Experience' button to the Player Scout tab on the Explore Landing Page.

• As part of ongoing improvements to filtering within the new experience, the Goal Keeper filter section on the Explore and Pitch Visualization pages has been removed.  More to come in the next few weeks on filter improvements.

• Only the relevant current section is now highlighted on the menu, previously 2 sections could be highlighted e.g. the Explore and Player section. 

• The load filters table is now sorted by last modified date by default.

• Added a 'duplicate' option to the filter sets table - under the 3 dots (along-with 'rename' and 'delete').

• Fixed a filter set selection bug - for users with Hudl Statsbomb open in more than one tab, it was possible to load a filter set in one tab and for this to load in another tab unintentionally.

   

• Display an active filter count on the Explore/Player Scout filter tabs

• Added pitch start and end filters to the Players/Pitch Visualizations

• Made page layouts 50:50 e.g. table/video take up 50:50 of the screen area

   

• Added a back button to the Players/Radar page preview - when clicking on the radar segment users will now see a '>> filters' button which will take them back to the filters on the Radar page

• Reversed the order of the panels on the Players/Pitch Visualizations page so that when viewing video the video panel is displayed on the right (to be consistent with the behaviour on the Players/Radar and Explore pages)

   

What did we improve?

• Hudl Signal users can now divide the session phases into smaller Tasks or Periods to allow for granular comparison and analysis of specific training or match segments.

What did we improve?

• Hudl Signal users can now visualize Number of Satellites and PDOP (Position Dilution of Precision) GPS quality metrics in Signal Library to quickly assess the reliability of their session data.

What did we improve?

• Hudl Signal users can now view player counts and zones & thresholds data in the 'More Info' modal for Intervals sessions sent to Signal Analysis from the Library.

What did we improve?

• Hudl Signal will now save your unsaved session changes so you don't lose your work if you accidentally refresh the page or navigate away.

What did we improve?

• Hudl Signal users can now restore deleted raw data sessions within 14 days, providing a safety net for accidental deletions.

• We've introduced keyboard shortcuts to Signal to help you navigate and perform actions faster than ever before.

What did we improve?

• Hudl Signal users can now customize the Zones and thresholds for Worst Case Scenario metrics, giving our users more control over the performance analysis.

• Hudl Signal users can now easily move individual players to separate sessions, allowing for better individualized analysis of player data.

What did we improve?

• Hudl Signal users can now customize the main zones and thresholds used to process the Intervals sessions, giving our users more control over the performance analysis.

What did we improve?

• Hudl Signal users can now download the Worst Case Scenario (WCS) data from the Library in an Excel format. This makes it easier to analyze the data offline.
   

What did we improve?

• Hudl Signal users can now view Heart Rate Variability (HRV) metrics in Hudl Signal Analysis after sending your session from the Library, adding deeper physiological insight to your reports.

What did we fix?

• Fixed the issue that was causing large files to fail, so users can now upload big files with confidence.

What did we improve?

• From now on, any session uploaded through Hudl Signal will automatically include Change of Inertia (COI) metrics. These metrics will be available in Hudl Signal Analysis immediately after the session is curated and sent from the Library.

What did we improve?

• From now on, any session uploaded through Hudl Signal will automatically include Change of Direction (COD) metrics. These metrics will be available in Hudl Signal Analysis immediately after the session is curated and sent from the Library.

What did we fix?

• We have fixed an issue in the WMK (SVIVO) file upload process where dead time (bench periods) was not being imported into the new session created in Hudl Signal.
• We have fixed an issue in Hudl Signal where the “Save & Return to Hudl Library” button was not available when a group was selected.

What did we improve?

• Hudl Signal users can now remove dead time from drills using the new Cut feature. This allows you to remove breaks (rest periods) and exclude bench time within existing drills, without needing to create a new one from scratch. By default, cutting applies to all players in the selected drill. However, we’ve also added a new shortcut (Shift + CMD + Drag) to remove dead time for individual players only, based on the specific timeline (graph) where it’s dragged over.

What did we improve?

• Hudl Signal now notifies users when players reach new maximum values (Speed, Acceleration, Deceleration, or Heart Rate) before sending a session to Hudl Signal Analysis. If any new maximums are detected, a confirmation modal will appear, allowing users to review and accept or reject these values.
• Users can now remove players from the Edit Sessions page for sessions that have already been sent. This allows sessions to be reprocessed without unnecessary data from unwanted players/devices.
• The toolbar in the Session Curation view has been moved from the top to the bottom of the screen. This change gives the zoom bar the full width of the view and prevents layout issues as new features are added. 

SVIVO Release 2.1.7.0

What did we improve?

• We’ve enhanced how the Targets are used and displayed in SVIVO, helping you monitor athletes more effectively in real time. With this new release, Targets are now visible across all SVIVO views: General, Grid, and Graph.
• No more duplicate setup (see Hudl Signal release notes):
  • Targets only need to be defined once in Hudl Signal.
  • Simply import the JSON file generated from Hudl Signal (no manual editing required).
• Once imported, the Graph view continues to show the performance against the targets with colour-coded thresholds, the Grid view now displays cell colours based on whether targets are being met, and the General view now highlights metric boxes to reflect target fulfillments.
• This update makes the target tracking more accessible and visible throughout your live workflows.

What did we improve?

• You can now split and create drills using additional metrics: Heart Rate and AccelT. Previously, only Speed was available for this functionality. This update gives you more flexibility to define drills based on the metrics most relevant to your workflows.

SVIVO Release 2.1.8.0

What did we improve?

• We have released new versions of SVIVO and SVIVO Server that enable users to visualise the two main Moxy metrics: Muscle Oxygen Saturation (SmO₂) and Total Hemoglobin (THb). After updating both products and integrating WIMU devices with Moxy sensors, you will be able to view these metrics in SVIVO across all views, including Excel export. This enhancement allows you to monitor live physiological responses, make on-the-fly training decisions, and improve athlete management during sessions.

WIMU Cloud Release 2.1.0

What did we improve?

• We’ve updated the navigation in WIMU Cloud to make it more closely aligned with the Hudl ecosystem — both in branding and design. These changes will come with no disruption to your existing workflows, and you will continue to benefit from all the powerful features of WIMU Cloud.
• You’ll notice updates to the WIMU Cloud interface, featuring a new top navigation bar that introduces a cleaner, more modern experience that aligns with other Hudl products.
• As part of this update, the WIMU Cloud brand is being discontinued and rebranded as Hudl Signal.

SPRO Release 2.3.1

What did we fix?

• The Hudl Sportscode integration now allows data uploads directly from the WIMU Smart Station. Previously, it only worked if the data was first downloaded to the computer.

WIMU Cloud Release 2.0.43

What did we improve?

We have increased the number of imperial metrics that are available to use on dashboards and with Excel Builder. The following metrics are now available:

• HMLD (yards)

• High Intensity HR Abs (yards)

• High Intensity HR Rel (yards)

What did we fix?

We have fixed a problem that was preventing the ‘Detail print’ functionality from being used in the Intervals Evolution Report and HRV Evolution Report.

WIMU Cloud Release 2.0.42

What did we improve?

We have increased the number of imperial metrics that are available to use on dashboards and with Excel Builder. The following metrics are now available:

• Player Load per Yard
• Distance (yards)
• Distance/time (yards/min)
• Abs HSR (yards)
• Abs HSR (yards/min)
• Sprints Abs (yards)
• Sprints Abs (yards/min)
• HSR Rel (yards)
• HSR Rel (yards/min)
• Sprints Rel (yards)
• Sprints Rel (yards/min)
• Speed Zones (yards)
• Speed Zones (yards)
• Speed Zones (yards)
• Max Speed (mph)
• Max Speed (P) (mph)

WIMU Cloud Release 2.0.41

What did we improve?

To enhance security all new WIMU Cloud users must now verify their email address before they can log in to WIMU Cloud. When a new user account is created an email will be sent to them with a link to verify their account. Clicking on the link will verify the user’s email address and allow them to log in to WIMU Cloud. New users will need to log in to WIMU Cloud by entering their email address in the username field on the login page - if they go to their profile they will also see that their email address is listed as their username. This only applies to new users; existing users can continue to log in with their username and password.

In WIMU Cloud a banner is displayed to users that don’t have a verified email address associated with their user account. To verify their account a user must visit their profile page and click on the verify email button at the top of their profile page. This will send a verification email to the user - clicking on the link in the email will verify the user's account and allow them to log in to WIMU Cloud. If a user changes their email address the same process will happen: the user will be sent an email and will need to click on the link to verify their account before they can log in again to WIMU Cloud.

If users do not have access to the email address associated with their account they must contact support. An email address can only be associated with one user account.

SPRO Release 2.3.0

What did we improve?

Send your WIMU physical data to Hudl.

• Your WIMU data can now be sent to Hudl and be imported into Hudl Sportscode (version 12.36 or later).
• This enables you to combine video and event data with velocity, acceleration and worst case scenario metrics to further contextualize your data.

Performance and stability improvements

• Further performance and stability improvements for the Intervals Pro, Steps and Dives monitors.
• These improvements reduce the chance of crashes and result in faster performance when running these monitors.

What did we fix?

• The application could previously get stuck due to an error message being thrown multiple times, preventing it from being closed and blocking the use of the application. This is now fixed.

WIMU Cloud Release 2.0.40

What did we improve?

• To enhance account security and individualization, we've updated the User Interface for creating, editing, and viewing Teams. The Team role is now categorised as Entity rather than Account.
• Building upon the previous point, active Team accounts (those used in the last 6 months) have been transitioned to Trainer accounts. These users can still access WIMU Cloud using their existing credentials (username and password) and retain the same privileges.
• To enhance security, all requests to WIMU Cloud from SPRO, SVIVO, or API must now use HTTPS. HTTP requests are no longer supported.

What did we fix?

• Fixed an issue in the Account Verification process where the email was not being received by the email addresses associated with the accounts that requested it.

WIMU Cloud Release 2.0.37

What did we improve?

• The new Federations feature now appears in production. This will enable Federations and Leagues to visualise all session and player data (new account type of Federation Administrator), enhancing athlete performance planning and centralised monitoring while we allow automatic sharing of player and data between Clubs and National Teams that belong to a Federation.
• Users within a Club, who are at the same level or lower compared to others, will only have the capability to modify their own password, not passwords of other accounts
• To enhance account security and individualization, we've updated the User Interface for creating, editing, and viewing Clubs. The Club role is now categorised as Entity rather than Account.
• Building upon the previous point, existing Club accounts have been transitioned to Club Admin accounts. These users can still access WIMU Cloud using their existing credentials (username and password) and retain the same privileges.

What did we fix?

• Fixed an issue in the Soccer System Pro integration where the connection was not working and new sessions from the 14th January couldn’t be linked to WIMU Cloud.
• Fixed an issue in the PDF Exportation where the Repeat per Grouping (Players) mode was not working in Dashboards.

SVIVO Release 2.1.2

What did we improve?

• We have made some behind the scenes improvements to introduce more detailed crash and error reporting. This will help us identify and resolve any issues with SVIVO out in the field more quickly and efficiently.

WIMU Cloud Release 2.0.36

What did we improve?

• Accounts that receive shared-players from other Clubs are able to change the WIMU ID of these shared-players without modifying the value in the owner Club.

What did we fix?

• Fixed an issue in the WIMU API where the endpoints “lastsession” and “sessions” were returning an empty response for Trainer accounts.
• Fixed an issue in the Dashboards Sets where the Sets with Basic Set option enabled were not being created.

WIMU Cloud Release 2.0.35

What did we improve?

• Club Admin accounts now are able to use the WIMU Cloud REST API. Previously, the API was only supported for Club and Trainer accounts.
  

What did we fix?

• Fixed an issue in the Club- and Team-owned Sets where the edition of them removed Dashboards created by other users.
• Fixed an issue in the default assignment of the Mediacoach ID where new players were not being assigned properly when importing sessions from mediacoach.wimucloud.com to wimupro.wimucloud.com.

SVIVO Release 2.1.1

What did we fix?

• Fixed an issue causing WIMU devices to stop being registered after using the Events feature.

SPRO Release 2.2.2

What did we improve?

• This release includes further performance and stability improvements for Intervals Pro monitor.
• This reduces the chances of crashes and results in faster performance when running Intervals Pro.

SPRO Release 2.2.1

What did we improve?

• This release includes a series of performance and stability improvements for Intervals Pro and Steps monitors. 
• This means faster performance when running these monitors with less likelihood of crashes or unstable behaviour due to memory issues.

SVIVO Release 2.1.0

What did we fix?

• Fixed an issue causing inconsistencies when importing Targets.

SPRO Release 2.2.0

What did we fix?

• We fixed an issue causing SPRO to crash on startup when the license code contains special characters.

WIMU Cloud Release 2.0.34

What did we improve?

• Club Admin accounts can now change the owner of Dashboards and Sets owned by them or their Club. A new dropdown list in the Configuration of Dashboards and Sets modal allows Club Admin users to choose the owner.
• Club Admin accounts are now able to view, edit and delete the Dashboards and Sets owned by their Club. The Dashboard/Set will appear as property of the Club but can be modified by the Club Admin user.
• Trainer accounts can now change the owner of Dashboards and Sets owned by them or their Teams. A new dropdown list in the Configuration of Dashboards and Sets modal allows Trainer users to choose the owner.
• Trainer accounts are now able to view, edit and delete the Dashboards and Sets owned by their Teams. The Dashboard/Set will appear as property of the Team but can be modified by the Trainer user with access to that Team.

WIMU Cloud Release 2.0.33

What did we improve?

• New and existing users are now able to verify their WIMU Cloud accounts through their email addresses. After creating a new account, the verification email will be automatically sent to the indicated email address. For existing accounts, each user will be able to review/update the email associated with its account and request the verification email from its own Profile view. Additionally, from the Profile view, the user will be able to see if the account is unverified, pending, or verified.

SPRO Release 2.1.0

What did we fix?

• We fixed an issue preventing license codes that include special characters from being registered.

WIMU Cloud Release 2.0.32

What did we improve?

• Club Admin accounts are now able to view and edit their Club’s details.
• Club Admin accounts are now able to create and edit other Club Admin accounts within their Club.
• Trainer accounts are now able to view and edit details of Teams they have access to.
• Special characters are now accepted in email addresses (inline with Apache Commons Validator).

WIMU Cloud Release 2.0.31

What did we fix?

• Fixed an issue in the Profiles where the user attributes were lost when a new user picture was uploaded.

WIMU Cloud Release 2.0.30

What did we fix?

• Fixed an issue in the Dashboard Groupings where the order did not show Drills as the first task for all sessions.
  

SPRO Release 2.0.3

What did we fix?

• Fixed an issue in the licensing system where the users couldn’t access the application once they had successfully registered the license on their PC.

WIMU Cloud Release 2.0.29

What did we fix?

• Fixed an issue in the Dashboard exportation to PDF where some widgets moved their position and overlapped page breaks.
• Fixed an issue in the Microcycle and History Static Reports where the names of the players were not displayed in the Players dropdown (Filter). 
• Fixed an issue in the HRV Static Reports where the Daily and Evolution reports were showing HRV sessions with empty data.
• Fixed an issue in the Static Reports where the new logos of the Teams were not updated after the changes.
• Fixed an issue in the API Players endpoint where the Team filter was not working.

WIMU Cloud Release 2.0.28

What did we improve?

• We have improved the toast notification messages when validating Usernames and WIMU Names in order to show users the requirements of these fields.

What did we fix?

• Fixed an issue in the Dashboards where some sessions were not displayed if the Filter Structure was different to the Free mode.
• Fixed an issue in the Dashboard Fleets where the links were accessible without password even if it had been generated.
• Fixed an issue in the Dives Daily Report where the Individuals exportation was not working.

SPRO Release 2.0.2

What did we improve?

• We have implemented the licensing system (including the license system in the Mediacoach SPRO version).
• We have increased the number of the tracks that we can analyse at the same time, from 1000 to 10000.
• We have implemented the SSH compatibility for downloading new versions in Windows 11.
• We have implemented a way to differentiate updates for licensed (2.x.y) and unlicensed (1.x.y) versions.
• We have implemented the new SPRO logo and some other “cosmetic” changes.

What did we fix?

• Fixed an issue in the Intervals Pro monitor where it was not possible to download in an Excel file the Recovery Extended and FreeJump Extended Tables. 
• Fixed an issue in the Intervals Pro monitor where it was not possible to save a profile with the acceleration extended threshold customised or a chart customised.
• Fixed an issue in the Intervals Pro monitor where the message "List index out of bounds 0" appeared when the user clicked a table with no data.
• Fixed an issue in the COI monitor where it was not possible to see all the COI in the COI Extended Table.
• Fixed an issue in the COI monitor where it was not possible to see the Frontal Left COI.
• Fixed an issue in the COI monitor where it was not possible to export an Excel file with the right data (it just was downloaded an empty file).
• Fixed an issue in the HRV 2 monitor where the values weren’t correct if the players didn’t have heart data. 
• Fixed an issue in the HRV 2 monitor that slowed down SPRO when uploading HRV 2 sessions with players who did not have heart rate data.
• Fixed an issue in the SVIVO marks file importation where the tasks created were not well imported.
• Fixed an issue in the licensing system where a user with a negative UTC Time Zone couldn’t access to SPRO application. 
• Fixed an issue in the SPRO_backup where the bucket service should not appear if that user does not have an associated AWS account.
• Fixed an issue in the Download Manager where it was not possible to detect the WIMU devices through Network when the WIFI was enabled.

WIMU Cloud Release 2.0.27

What did we fix?

• Fixed an issue in the Dashboards menu where the Sets and their Dashboards were disappearing after opening the edit dialog and closing it without saving.
  

WIMU Cloud Release 2.0.26

What did we fix?

• Fixed an issue in the JSON exportation where the sessions could not be exported when not all teams were visible.
• Fixed an issue in the Dashboards where the grouping of Competitions showed the id instead of the competition name.

WIMU Cloud Release 2.0.25

What did we fix?

• Fixed an issue in the toast notification messages where the invalid email notification still showed old message.
• Fixed an issue in the toast notification messages where password validation messages were inconsistent.
• Fixed an issue in the toast notification messages where an invalid message appeared when the user updated the fleet password from the Configuration menu.

WIMU Cloud Release 2.0.24

What did we improve?

• We have updated toast notification messages to improve and clearly communicate if the user action taken was successful or not and why. 

What did we fix?

• Fixed an issue in the Dashboard Sets where the thumbnail was not displayed during the creation process.
• Fixed an issue in the PDF export workflow where the Filter widget was not printing the groupings of Positions and Variables as expected.
• Fixed an issue in the PDF export workflow where the Filter widget displayed the grouping of Players populated the first time but then empty for subsequent exports.

WIMU Cloud Release 2.0.23 

What did we fix?

• Fixed an issue in the Acute:Chronic Data Table where the Heatmap view would incorrectly display an empty state when data existed.
• Fixed an issue in the WIMU Cloud footer where the WIMU Hardware field had a fixed language (GB) in its link.

WIMU Cloud Release 2.0.22

What did we improve?

• Added a new footer with links to the latest Product, Tutorials, and Resources pages.

What did we fix?

• Fixed an issue in the Dashboards where some tasks within the same session would appear in separate groupings with the same date.
• Fixed an issue in the Grid widget where the Dashboard would fail to finish loading when the user deactivated a selection from the Grid widget (more than one grouping).
• Fixed an issue in the Scatter widget where the Regression lines were not displayed.
• Fixed an issue in the WIMU dashboard creator where the fleets appeared as "created by the user" instead of "created by WIMU".
• Fixed an issue in the Dives Daily Report where selecting all available sessions and more than one task generated a query that never resolves.

WIMU Cloud Release 2.0.21

What did we improve?

• We have updated the WIMU Dashboard “Daily Report” with the following changes: remove borders, add decimals, average lines and new Chart widget.
• We have reordered the fields in the Profile tab while creating and configuring Trainer and Medical accounts.
• We have improved the visualisation of the Terms and Conditions page which must be read and accepted by new WIMU Cloud users.
• We have updated the logos and profile picture for Mediacoach users based on the new identifications of LA LIGA and its competitions.

What did we fix?

• Fixed an issue in the Sessions menu where the Visible Teams were not displayed properly the first time a new user logged in.
• Fixed an issue in the Dashboard Appearance where the background colour was not updated after modifying its configuration.
• Fixed an issue in the COI widgets where the COI EXT and COI POINTS widgets were missing their names in the configuration dialogs. 
• Fixed an issue in the Dashboard fleets where all the Acute:Chronic Data Table widgets appeared empty/broken.
• Fixed an issue in a specific custom metric (Total Real Time) that couldn’t be selected within a Vertical Filter widget.
• Fixed an issue in a specific custom metric (sRPE) that was breaking the widgets after choosing it.
• Fixed an issue in the Accounts List where the selected element was not updated after creating a new account.
• Fixed an issue in the Reset Password menu where the links were being generated with http instead of https.
• Fixed an issue in the WIMU Attributes where some were duplicated and now have been removed.

WIMU Cloud Release 2.0.20 (Hotfix)

What did we fix?

• Fixed an issue in the WIMU Cloud Rest API where the “login” endpoint was returning a 500 error, which blocked users to use any other endpoint and make the requests.

WIMU Cloud Release 2.0.19

What did we fix?

• Fixed an issue in the whole application where the different functionalities (Sessions, Static Reports, Dashboards…) referenced different Player Name formats.
• Fixed an issue in the Sessions menu where users were unable to interpret truncated values in some data tabs.
• Fixed an issue in the Sessions menu where the attributes added were lost after editing the session.
• Fixed an issue in the PDF exportation where it did not work in Dashboards and Static Reports.
• Fixed an issue in the PDF exportation where the printing did not work when SSL was enabled.
• Fixed an issue in the Dashboard links where the URLs were generated with httpss instead of https.
• Fixed an issue in the Dashboard links where all fleets displayed "created by WIMU" regardless of the account they were generated from.
• Fixed an issue in the Dashboard links where the generated fleets showed all widgets broken when sharing WIMU Dashboards.
• Fixed an issue in the History static report where it took too much time to load.

WIMU Cloud Release 2.0.18

What did we improve?

• Sprint Duration metric now is hidden from Sessions view as it’s not uploading from SPRO.
• We have updated the login page to match the Hudl's identity.
• The modal and the expired link now include more information about the expiration (24 hours from generation) of the password reset link.
• We have updated the hudl.com WIMU Cloud login to redirect this to the new environment (app.wimucloud.com).
• We have uploaded the new WIMU (Default) Dashboards in Wimupro, Mexico and FC Barcelona environments. Explore this feature further here.

What did we fix?

• Fixed an issue in the Grid and Chart widgets where the merged groupings did not order the values properly. 
• Fixed an issue in the Dashboard links where these fleets did not load where including them into an i-Frame on an external server.
• Fixed an issue in the Daily Report where the Individual Reports had different names files when exporting them.
• Fixed an issue in the History static report where it took too much time to load.
• Fixed an issue in the Sessions menu where after editing a session or assigning some attributes, some functionalities stopped working.
• Fixed an issue in the Monitor Types where we updated the names to be consistent with the rest of the product.
• Fixed an issue in the Session Type where the Coadjuvant Structural in SPRO mapped to Coadjuvant Preventative in WIMU Cloud.
• Fixed an issue in the Teams creating where new teams did not appear and deleted teams did not disappear in the Visible Teams list until the user logged out and logged in.
• Fixed an issue in the API where some players have relative ranges labelled as absolute.

WIMU Cloud Release 2.0.17

What did we improve?

• WIMU Cloud Changelogs tab now redirects to Hudl website (What’s New section).
• Trainer and Medical accounts now automatically assign a default team when creating the account.
• User creation toast messages now include the type of account created/modified.

What did we fix?

• Fixed an issue in the Dashboards where the widget configuration window was always aligned at the top of the screen.
• Fixed an issue in the Chart widget where the Team colour broke the widget if a player from a different team than the team selected appeared in the widget.
• Fixed an issue in the Acute:Chronic Data Table widget where the Visual Map was not working for Continuous and Column-Scoped modes.
• Fixed an issue in Boxplot and Gauge widgets where some comparator fields did not appear by default.
• Fixed an issue where Trainer, Medical and Team accounts were unable to access the Changelogs tab.
• Fixed an issue in the Team accounts where the logo was not shown in the Teams List when a Team inherited its Club logo.
• Fixed an issue that resulted in inconsistencies in some fields of Wimu-Cloud depending on the language of the browser.

WIMU Cloud Release 2.0.16

What did we improve?

• WIMU Cloud logos and colours have been updated in line with the Hudl identity.
• Users can now dismiss notification toast messages.
• When creating or editing Player accounts all mandatory fields are now displayed on the first tab.

What did we fix?

• Fixed an issue where attributes added during the Player Creation process would not appear on the Player profile.
• Fixed an issue where Trainer and Medical accounts were unable to save changes to their account details.
• Fixed an issue that resulted in some of the fields for Sessions imported via JSON file displaying incorrectly.
• Fixed an issue where some widgets were missing placeholders to be displayed when empty.
• Fixed an issue to mark all mandatory fields for Club/Admin/Team/Medical/Player creation workflows with.
• Fixed an issue in Gauge, Boxplot and KPI widgets to use the latest comparator structure and labels.
• Fixed an issue where Session start and end times were inconsistent across the Calendar, Session and Tasks entries.

WIMU Cloud Release 2.0.15

What did we fix?

• Fixed an issue where users were unable to add attributes to a Player profile, and attempting to do so would result in the page becoming unresponsive.

WIMU Cloud Release 2.0.14

What did we fix?

• Fixed an issue in the Sessions menu where the empty state showed the current date when a user had no sessions.
• Fixed an issue in the History Static Report where users were unable to create and save a new profile.
• Fixed an issue in the History Static Report where the calendar overlapped with the widgets which meant the user was unable to select alternative dates.

WIMU Cloud Release 2.0.13

What did we fix?

• Fixed an issue in the connection with SVIVO where users were not able to visualise player details in the app due to a problem in downloading from WIMU Cloud.

WIMU Cloud Release 2.0.12

What did we improve?

• Users can now use Week Team and Week Match Day as groupings in filters and widgets.
• When creating/editing a Player account the user now has the ability to enable/disable WIMU Cloud Access. New Player accounts have WIMU Cloud Access disabled by default and no longer require the mandatory email and password fields which drastically improves the user experience and speeds up the creation of Player accounts.
• Password Management: password input fields now include an eye icon that allows the user to review the text input.

What did we fix?

• Fixed an issue in the Acute:Chronic Data Table widget where the rows were not adjusted when there were a few elements in the Grid view.
• Fixed an issue in the Acute:Chronic Data Table widget where the sessions from other teams were not appearing when the Participated mode was selected.
• Fixed an issue in the Evolution Static Report where the PDF printed appending blank pages.
• Fixed an issue in the Evolution Static Report where selecting a single player would return an empty report.
• Fixed an issue in the Match Day Static Report where the Date Range did not update the selected day in the filter.
• Fixed an issue in the Match Day Static Report where some days with sessions would not load.
• Fixed an issue in the Bulk Exportation of Sessions where JSON files were not downloaded correctly when two (or more) sessions had the same names.
• Fixed an issue where updates made to the Team Color would not be applied until the user logged out and back in.
• Fixed an issue in the Player Profiles Excel export file which resulted in some values being misaligned.
• Fixed an issue in the Player Profiles where users were not able to import from the Excel file.
• Fixed an issue in the Players Profiles where the screen became unresponsive after opening the evolution charts for each metric.

WIMU Cloud 2.0.9

What did we fix?

• Fixed an issue in the Session Calendar where the week was starting on Sunday instead of Monday.
• Fixed an issue in the Filter Widget where the week was starting on Sunday instead of Monday.
• Fixed an issue in the Weeks Grouping where Sunday sessions were not being added to the group correctly.
• Fixed an issue in the Evolution Static Report where the Excel file could not be exported.
• Fixed an issue in the Funnel Widget to work when more than one monitor is selected in the Dashboard configuration.
• Environment Specific fixes:
  • (Mediacoach) Fixed an issue in the Sessions menu where the Session bar disappeared when more than 6 teams were selected.

WIMU Cloud 2.0.8

What did we improve?

Widgets

• Acute:Chronic Data Table: 
  • In Grid view users can now configure the colour of the table cell or the value (text) from inside the "Visual Map" option.
  • In Heatmap view users can now customise the date range shown in the X axis to display the date range from the dashboard or widget configuration.

Password Management

• More Secure Accounts: User accounts are now locked after 5 consecutive failed login attempts. To unlock the account a user can either manually request a superior user account from the same club to change the password or by requesting a password reset link from support.
• Password Validation: Users now see a tooltip which displays the validation required and as these are satisfied the requirement turns from red to green.

What did we fix?

• Fixed an issue in the Password Management where an error message appeared before finishing writing or saving.
• Fixed an issue in the Chart widget where after adding new variables these were not being displayed in the legend.
• Fixed an issue in the Acute:Chronic Data Table widget where the Grid and Heatmap views displayed different values.
• Fixed an issue in the Acute:Chronic Data Table widget where the Heatmap view displayed multiple data points in the same box.
• Fixed an issue in the Date Range Filter widget where Sessions from the last selected day in the range were excluded.
• Fixed an issue in the Match Day Report where the Session's header didn’t update with the filters.
• Fixed an issue in the Attributes Menu where the list of tags in text type attributes could not be sorted.

WIMU Cloud 2.0.7

What did we improve?

• Acute:Chronic: we have documented the calculation processes for all the Acute:Chronic visualisations:
  • Acute:Chronic (widget).
  • Acute:Chronic Data Table (widget).
  • Acute:Chronic (static report).
  • Match Day Extended (static report).
• Password Management: improved security around the password reset link by requiring users to validate their username when resetting their password.

What did we fix?

• Fixed an issue with exporting the Players JSON file (SS Config) from the Team Profile.
• Fixed an issue in the Chart widget where the values changed when the user sorted the players by a metric with the comparator activated.
• Fixed an issue in the Acute:Chronic Data Table widget where the Grid and Heatmap views displayed different values for the same player and day.
• Fixed an issue in the Acute:Chronic Data Table widget where the Heatmap view displayed different values for the same player and day when the end date changed.
• Fixed an issue in the Microcycle static report where the date filter was not working.
• Fixed an issue in the Sessions menu where the Disabling Intervals Table function was not working.
• Environment Specific fixes:
  • Fixed an issue in the Sessions menu (Mediacoach environment) where the trainer accounts could only access  the last 5 sessions.
  • Fixed an issue in the API Players query (Mexico environment) to only return Players belonging to the user.
  • Fixed an issue in the API Informs query (Mexico environment) to  export all the players participating in the session.

WIMU Cloud 2.0.6

What did we fix?

• Fixed an issue in the connection between SPRO and WIMU Cloud where the monitors were not saved for uploaded sessions.

WIMU Cloud 2.0.5

What did we improve?

Dashboards

• Widgets: 
  • Acute:Chronic Data Table: users can now include the number of decimals per variable when using Grid view.

Password Management

• More Secure Passwords: when creating/changing account passwords these must now pass more stringent validation including a minimum character length and format.
• Reset password: users now have the ability to reset or change their password via a link that is shared from the Support team.

What did we fix?

• Fixed an issue in the Chart widget where the values change when the user orders by a comparator metric.
• Fixed an issue in the Widget Tree Filter when the user adds an Acute:Chronic widget as a child of a Filter widget and the dashboard breaks
• Fixed an issue in the Dashboard List view where the dashboard thumbnails for Sets are not consistent and change when sorting columns.

WIMU Cloud 2.0.3

What did we fix?

• Fixed an issue in the Excel massive exportation where some team average rows had the wrong formula.
• Fixed an issue in the Dashboard view where the top menu and Session main filters did not load for certain Dashboards.
• Fixed the Dashboard List view widget count Fixed an issue in the Dashboard List view where the dashboards could not be sorted based on the column header.
• Fixed an issue in Dashboard Sets where the page did not load when the user switched teams when viewing within a Dashboard the Set.
• Fixed an issue in the Acute:chronic static report where Date and Player filters were not being applied correctly.
• Fixed an issue in the Acute:Chronic Data Table widget where the first day was located in the last column of the Heatmap.
• Fixed an issue in the Acute:Chronic Data Table widget where the editing window configurations did not update when the user changed between Grid and Heatmap modes.
• Fixed the Acute:Chronic Data Table widget thumbnail.
• Fixed an issue in the Sessions menu where the Sessions with more than 35 players were not displayed correctly.
• Fixed an issue in the Grid widget where the ranges were always coloured based on the first range.

WIMU Cloud 2.0.2

What did we fix?

• Fixed an issue in the Scatter widget where the grouping of Attribute was unavailable in the La Liga environment.
• Fixed an issue in the Scatter widget where users were unable to change the metrics.
• Fixed an issue in the Grid widget where the Z-Score Upper colour was not working.
• Fixed an issue in the Grid widget where users were unable to filter to other widgets when one or more groupings were hidden.
• Fixed an issue where the Dashboard Page was not loading for some Mexican teams.

Hudl Replay 2.69.0

What did we fix?

• Multiple presses of the log out button were sometimes required. This has been fixed, and logging out now only requires a single button press.

Hudl Replay 2.68.0
 

What's new?

• Users can now request the deletion of their account from the Settings screen.

Hudl Replay 2.67.0

What did we improve?

• Hudl Replay now handles login through Auth0.

Hudl Replay 2.66.0

What's new?

• Replay is now available in:
  • Chinese (Simplified)
  • French
  • German
  • Greek
  • Italian
  • Japanese
  • Korean
  • Portuguese (Brazil)
  • Portuguese (Portugal)

What did we fix?

• The sidebar will no longer flicker when pressing the back button from within a selected playlist or group.

Hudl Replay 2.65.0

What's new?

• Replay is now available in Turkish.

What did we improve?

• For multi-angle captures, video for angles other than the one being viewed will be downloaded more frequently and reliably.
• The video progress bar and angle indicator is now overlaid on-top of the video in fullscreen.

What did we fix?

• The video player no longer unnecessarily reloads when moving in and out of fullscreen.
• The video player will now stay at the current video time when switching between angles in VOD/offline mode.
• The labels on the clip or instance being watched will be shown fully while in fullscreen. Previously, they were slightly cut off.
• The video player will now stay at the current video time when backgrounding and foregrounding the app.

Hudl Replay 2.64.0

What did we fix?

• Replay's UI no longer shows a connected status or join banner for inaccessible capture sessions.

Hudl Replay 2.63.0

What did we improve?

• Switching between angles in a multi-angle session is now faster.

What did we fix?

• When switching between angles in a multi-angle session, the new angle will no longer briefly flicker with other parts of the video.

Hudl Replay 2.62.0

What's new?

•  Replay is now available in Spanish.

What did we improve?

• Icons are now shown for the "Playlists", "Instances" and "Reports" sidebar buttons.

Hudl Replay 2.61.0

What did we improve?

• General Maintenance

Hudl Replay 2.6.0

What did we fix?

• Previously, it wasn’t possible to rearrange the order of a clip in a playlist once notes had been added. We have now fixed this.
• Clips in a playlist will no longer be covered when swiping in the list.

Hudl Replay 2.59.0

What did we improve?

• Improved the UI to better support iPads without a physical home button

Hudl Replay 2.58.0

What did we improve?

• Users will now experience a much smoother Video timeline progress bar
• Video automatically plays when going live
  

Hudl Replay 2.54.0

What's new?

• You can now playback instances and clips with their own progress bar in the Instance Viewer, making it even more efficient to navigate to key aspects of specific situations

What did we fix?

• Fixed an issue where playing an instance multiple times in a row would cause Replay to not receive new live video
  

Hudl Replay 2.53.0

What's new?

• Users can now fast forward video

What did we improve?

• Video timeline playhead updates more smoothly

Hudl Replay 2.51.0

What's new?

• Users can now share output windows exported from Hudl Sportscode to Hudl Replay

What did we fix?

• Fixed an issue where instances would be misaligned or disabled if created after pausing a multi-angle capture in Hudl Sportscode

Hudl Replay 2.50.0

What did we fix?

• Fixed an issue where instances created after the capture has been paused would be disabled incorrectly or play at the wrong time

Hudl Replay 2.49.0

What did we improve?

• Instance notes added on Sportscode are now visible on Replay
• Replay is no longer compatible with Sportscode version 12.2.39 or older

Hudl Replay 2.48.0

What did we improve?

• When using Hudl Sportscode 12.3.7 or later users will now be able to see sessions they don't have permission to join.

What did we fix?

• Fixed an issue where Japanese characters would cause issues in the communication from Hudl Sportscode with Replay
• Fixed an issue where scrolling through a list of instances would cause instances to play unintentionally
• Fixed an issue where scrolling through a list of playlists would cause playlists to open unintentionally

Hudl Replay 2.47.0

What did we fix?

• Fixed an issue where navigating into and back out of full screen would reset users position in the sidebar playlist/ instance menu
• Fixed an issue where users were unable to reorder the first clip in a playlist

Hudl Replay 2.46.0

What did we fix?

• Fixed an issue where Replay would crash when creating the first playlist after updating

Hudl Replay 2.45.0

What did we improve?

• Clarified the state of the Previous/Next button in fullscreen when outside groups or playlists

What did we fix?

• Fixed an issue where the header information was persisting outdated information.
  

Hudl Replay 2.44.0

What did we improve?

• General Maintenance

Hudl Replay 2.43.0

What did we improve?

• Added the ability for users to pinch on the video player to zoom in on the action
• Added the ability for users to configure the lead and lag time for Coach Tagging Instances created on Replay
• Significant performance improvement when importing large volumes of instances from Hudl Sportscode

Hudl Replay 2.42.0

What did we fix?

• Fixed an issue where Replay was unable to find new sessions after locking and unlocking the screen while Replay was open
• Fixed an issue where the network status would be green and the network name would show even though the device was not connected to the network

Hudl Replay 2.41.0

What did we improve?

• Added the ability for users to watch video in slow motion
• Added the ability for users to double tap on the video to zoom in on the action

What did we fix?

• Fixed an issue where in fullscreen Next & Previous play controls would appear enabled even when there are no Clips/ Moments to skip between

Hudl Replay 2.40.0

What did we fix?

• Fixed an issue where switching the playback angle of an instance would skip to the next instance.
• Fixed an issue where tapping on a clip in a playlist would not consistently result in the clip being played.

Hudl Replay 2.39.0

What did we fix?

• Fixed an issue where Replay would become sluggish and unresponsive when processing larger volumes of Instances
• Fixed an issue where switching angles during playback - from a non-Live position - would result in the playhead jumping to Live position in the new angle

 Hudl Replay 2.38.0

What did we fix?

• Fixed an issue where notes added to clips in playlists weren't being saved
• Fixed an issue where rows in Hudl Sportscode which did not contain Instances were being displayed in Replay

Hudl Replay 2.37.0

What's new?

• Users can now create instances in Replay which are shared with Hudl Sportscode

What did we improve?

• On startup, we now inform users when a new version of Replay is available
• Changed the layout of the Diagnostic screen

What did we fix?

• Fixed an issue where rows from expired Replay sessions were not being deleted
• Fixed an issue to request user's location permission to capture and display the Network Name in the Device Info Settings

Hudl Replay 2.36.0

What did we fix?

• Fixed an issue where Hudl Replay v2.35.0 was unable to discover sessions created by Hudl Sportscode v12.2.39 and older

What did we improve?

• Connectivity status checks displayed more compact

What are we working on?

• Finalized the technical foundation for users to create instances in Replay

Hudl Replay 2.35.0

What are we working on?

• Building the technical foundation for users to create instances in Replay.

Hudl Replay 2.34.0

What did we fix?

• Fixed a defect where discovered sessions were not being refreshed when a new user logged in

Hudl Replay 2.33.0

What did we improve?

• General maintenance

Hudl Replay 2.32.0

What did we improve?

• Bug fixes and performance improvements

Hudl Replay 2.31.0

What did we improve?

• Added a new Diagnostic Summary screen within the Settings menu. This summary helps highlight problematic configurations if/when experienced by the user.

Hudl Replay 2.30.0

What did we fix?

• Fixed an issue where a black screen would be displayed after unlocking the app
• Fixed an issue where a "Video Unavailable" message was displayed when joining a session shortly after it was started
• Fixed an issue where the device name would be truncated in the session dropdown

Hudl Replay 2.29.0

Important! To continue to discover sessions, please make sure you have updated Hudl Sportscode to 12.2.37

What did we improve?

• Improved new discovery mechanism between Hudl Sportscode and Hudl Replay which will enable us to troubleshoot issues more effectively as well as innovate with new features faster.
• Security is now baked into Session discovery, so when you log in to your Hudl Account (from Hudl Sportscode), any capture sessions you create can only be discoverable by members of your team.
• Improved video latency between devices when live sharing for both IP & AV Foundation feeds.
• Added a one-time popup on the Session Screen to inform users to update Hudl Sportscode to get the latest Session Discovery updates

What did we fix?

• Fixed an issue which caused the Replay app to crash after reopening the iPad from a locked state

Hudl Replay 2.28.0

What did we improve:

• Improved the detection of Sportscode devices in complex networking setups
  

What did we fix:

• Fixed an issue where a black screen would be encountered while connected to a VPN.

Hudl Replay 2.27.0

What did we fix:

• Fixed an issue where Replay was unable to reconnect to a Hudl Sportscode Session which had stopped while the app was backgrounded
• Fixed an issue where re-opening an existing session on a non-default angle would result in a black video screen being displayed

Hudl Replay 2.26.0 

What did we fix:

• Fixed an issue where Hudl Sportscode Sessions started when the App was backgrounded would not auto-connect when foregrounding the App.
• Fixed an issue where starting new Hudl Sportscode Sessions without closing Hudl Sportscode when the App was backgrounded would not auto-connect when foregrounding the App.

Hudl Replay 2.25.0

What did we fix:

• Fixed an issue where users were unable to reconnect to a live stream after backgrounding and foregrounding the Replay app.
• Fixed an issue where the Replay app would crash on startup.

Hudl Replay 2.24.0

What did we fix:

• Fixed an issue where users were unable to reconnect to an existing Hudl Sportscode session after exiting the Replay app.

Hudl Replay 2.20.0

What did we improve:

• Hudl Replay now supports iOS 14. 
• On iOS 14, Replay now asks for permission to find and connect to devices on your local network. Be sure to grant this permission, to allow Replay to connect with Sportscode.

Hudl Replay 2.19.0

What did we improve:

• Replay now uses Sportscode terminology! Look for references to instances, notes and video packages within the app.
• If your network is configured to prevent Replay from being notified about computers running Sportscode, you can now connect manually. Just tap the settings cog, then “Manual Connection”.

Hudl Replay 2.10.0

What did we improve:

• If the capturing computer is unreachable, you are now notified via a banner.
• If your iPad is disconnected from the network, you are now notified via a banner.

Hudl Replay 2.9.0

What we fixed:

• A bug which caused the skip forward and back buttons to be unresponsive when tapped in quick succession.

Hudl Replay 2.8.0

What did we improve?

• The Hudl logo on the login screen is now orange, and aligns with other products in the Hudl Pro Suite.

What did we fix?

• A crash which occurred occasionally when you switch to another session from the video screen.

Studio 2.2.8 
On MacOS Sequoia (15.1.1), exporting an instance with Studio edits lowers the original FPS of the video by a certain amount.

The download link is here

Studio 2.2.7

This contains fixes for:

• Studio goes completely black and workspace disappears after adjusting a disc or connected disc

Studio 2.2.6

What did we fix?

• When applying 2D or 3D Discs to Stills, Disc drifts off player when video is played back.
• Bounding boxes can be dragged off the video rather than sticking to the edges
• 2D beam is duplicated when added into video on Studio v2.2.4

Studio 2.2.5

What did we fix?

• For multi-angle videos, 3D Calibration is NOT automatically initiated for the angles except of the first one
• When changing the size of text in trackable discs (2D & 3D), the manual input of numbers does not work as expected
• Additional angles drop out when a still is added to a trimmed clip
• Copying and pasting an image in v2.2.4 does not retain it's position as it did in v1.14.0

Studio 2.2.4

What did we fix

• Support longer videos when stretching the timeline.
• Calibration camera type will be respected after clicking "Clear All" calibration points.
• Calibration lines will disappear after clicking "Clear All" calibration points.
• Sport will no longer be automatically selected after loading newly saved projects.
• Fixed an issue where exported videos could play at a slower speed
• Syncing 3D items across angles.
• Calibration frame zoom view updates when dragging field diagram points on the video.
  

Studio 2.2.3

What did we fix

• Occasional accelerated playback after exporting clips.
  
• Auto-tracking no longer applies to groups.
  
• Fix styling and placement when dragging an effect from the team tab.
  
• Effects no longer persist in Coach Mode when the last tool setting is enabled.

What did we Fix?

• Fixed minor issue when adding effects within stills
• Fixed ability to copy/paste images from clipboard

What did we fix?

• Subsequent clips not syncing back to HSC after the first sync.
• Image aspect ratio on video export when we have multiple effects with the same image. 

Version 2.2

Highlights

• Trackable effects are now automatically tracked after being added or edited.
• Now, you can change the camera position and initiate tracking for all clips/angles through the playlist tab.
• Copy camera positions, including associated angles, to other clips and their associated angles. More information
• The Coach Mode effect toolbar is now customizable. More information
• Images, Panels, and Calibrations assets can now be organized into folders. More information

What did we improve?

• The Asset tab remains visible after adding a panel/image to the canvas.
• Enhanced timeline scrolling performance with a large number of effects.
• Smoother video scrubbing when dragging the playhead.
• Improved arrangement of effect drawing order.
• Preferences overlay is now scrollable.

What did we fix?

• Disc Effects no longer disconnect from the player after onward tracking has been initiated.
• Tracking can now be performed when adding a player move effect with no associated still.
• Animated effects now remain stationary during stills.
• Keyframes now remain in the correct position when moving or resizing an effects timeline.
• Keyframes are no longer displayed if they are outside the effect timeline when moving or resizing an effect timeline.
• Start/end keyframes are now correctly updated when resizing/moving tracked effects.
• The end keyframe is now correctly updated when deleting the last keyframe.
• Handle missing data correctly from wyscout.
• Startup now functions correctly with non-trackable sports.
• Field settings are now retained when loading a new clip or creating a new project.
• Fixed basketball calibration point projections after changing the court type.
• Field lines are now shown when selecting an existing calibration frame.
• Field lines are updated when deselecting a calibration frame.
• Copying text can now be performed from the canvas and input controls.
• Players are now correctly tracked after changing their position at the start keyframe.
• Playhead and keyframes now stay aligned when dragging the start or end keyframe.
• The player path is now updated when the box position is edited manually.
• Fixed occasional problems with the visibility of effects bounding boxes on the first and last effect frame.
• The number of angles remains visible on the angles icon after expanding and collapsing angles.
• Hotkeys now function for shifting the effect timeline to the playhead and for clip navigation.
• A 2D Arrow effect is now fully displayed when added to a clip.
• Animated effect visibility is now maintained when seeking to the first frame after playing through the out animation.
• The drop-down menus now display in the language set in Studio preferences
• You can now sync back to Sportscode after loading an autosaved version of a clip.
• Addressed a rare situation where effects could be created with “tracking...” visible without any tracking occurring.
• The timeline header and time indicator are always visible, even with a large number of effects.
• Playhead no longer jumps when importing high-resolution clips into Studio.
• Opacity and size effect properties can now be adjusted using keyboard shortcuts and mouse scroll.
• Occasional black frames after syncing a clip back to HSC.
• Resolved freeze issue when connected to external displays.
• Drag and drop images onto Studio’s canvas.
• Side panel tab labels no longer overflow in some languages.

Version 2.1.0

What did we improve?

• Enhanced background generation when using the eraser and move player tools.
• Introduced the MM:SS format option to the watch tool.
• You can now add a background to the text tool.
• You can now add a background to the watch tool.
• Enhanced the auto-update functionality and included update instructions.
• Utilization of SHIFT and CTRL/CMD while selecting keyframes on the timeline.
• Text selection now mirrors Mac selection behaviour: triple-click to select all text within an effect.

What did we fix?

• Fixed text input/canvas issues.
• Resolved the issue where text associated with disc effects was appearing in unrelated clips after export.
• Improved the positioning of pasted 3D effects after copying.
• Improved selection and movement of small canvas effects.
• A new set of connected discs can now be created by selecting the tool in the toolbar during the ongoing creation.
• Arrow length on play animation now functions as expected with arrow tool.
• Tolerate corrupt 3D data.
• Resolved Chroma validation issues with v1 projects.
• Resolved field options validation issues with v1 projects.
• Problems when loading settings with invalid data.
• Chroma properties no longer disappear with some inputs.
• Project name is now reflected correctly after project has been loaded.
• Tracking progress bar is now correctly updated.
• UI reflects settings from startup.
• Fixed slider control inputs.
• Remove build timestamp from stable release version.

Version 2.0.5 

What did we fix?

• Problem when loading settings with invalid connected disc preset.

Version 2.0.4 

What did we fix?

• Problem when loading settings with invalid data.

Version 2.0.3 

What did we fix?

• Problem when loading projects with corrupt calibrations 3D data.
• Fixed issues with loading v1 projects. 

Version 2.0.2 

What did we fix?

• Fixed an issue when saving a project after chroma color balance has been changed.
• Addressed problems caused by dragging a calibration point outside the image area.
• Resolved issues with connected disc properties and presets.
• Fixed occasional problem when computing the calibration.
• You can now save a project that includes a 3D panel with text.

Version 2.0.1

What did we improve?

• We've added the ability to reset your settings to v1.

What did we fix?

• Loading a v1 project with tracked clips without a calibration setup.
• Issue when first dragging a calibration point onto the image when we already have 3D data.
• Problem when loading v1 presets.
• Issues that were causing a "fail to render" error.
• Effects rendered correctly after removing original clip in HSC Organiser.

Version 2.0.0

Highlights

We've added a feature that automates the tracking process for all clips in your playlist.

What did we improve?

• Calibration points are now highlighted in the inspector.
• You can now hold CTRL to select multiple items on a clip.
• You can now see the 3D tracking status on clip thumbnails.
• The 3D tracking status is now visible on the tracking button.
• We've simplified the object arrangement options to 'background', 'middle' and 'foreground'.
• The timeline will be now hidden if there's no video.
• You can now see the calibration source when you copy calibrations to other clips.
• When you increase or decrease the length of a still, the accurate time in seconds is now visible on the timeline.
• You can now update the length of a still between 0.1 and 100 seconds in the inspector.
• The 3D tracking status indicators are now more visible in the UI.
• The 2D and 3D section ranges are now consistent.
• We've improved the usability of 2D arrows when you move a player's position in a 2D section.
• We've added a note to 'Preferences' > 'General' to remind users to restart Studio after changing the language.
• We've added a text opacity property to 3D discs.
• You can now update the background image of the 2D timer tool.
• It's now easier to move multiple 2D and 3D items.

What did we fix?

• Freehand tool properties now persist in the inspector.
• Background images in the text tool now work as expected.
• When you import multiple clips, the first clip is now selected in your playlist, not the last.
• If you adjust or remove the duration of a still, the playhead now remains in the same position.
• Still and clip frame rates are now consistent.
• The camera position in 'Clip Settings' is now set to 'Center Camera' by default.
• It's now possible to track an object in full after it's been extended.
• You can now use the 'Delete' button in the 'Edit' menu to remove objects from clips.
• We've fixed an issue in Coach Mode where 3D tools were unavailable in 3D sections.
• You can now hold CMD + Shift + T to use the 'Track Onwards' feature.
• You can now undo individual placements of 2D lines and polygons.
• Imported clips from Hudl Sportscode now show the correct name in Coach Mode.
• The timer tool now includes the duration of stills in clips.
• You can now use the arrow keys to navigate frames in stills.
• Studio now resizes as expected when you adjust the screen width
• We've resolved an issue where duplicate beams appeared on new projects.
• We've fixed an issue where you could modify a locked object's duration and position.
• You can no longer track clips if the calibration frame doesn't contain any data.
• We've added 'default' to the 'Move player' and 'Tactical board' duration settings in 'Preferences' to better reflect the functionality.
• Chroma now remains enabled when you navigate different clips.
• The chroma effect now applies across entire clips, so we've removed timestamps from the chroma inspector.
• The chroma and still inspectors are now consistent with other inspectors in Studio.
• We've fixed an issue where an object's border and instructions remain on screen after you select a different object.
• The 'Override Preset Colors with Team Colors' setting now works as expected.
• You can now see when a playlist export has been cancelled in the UI.
• When you export a Hudl Sportscode playlist from Studio to your device, only clips that have been edited in Studio will be exported.
• You can now select the 'Reset' button in 'Preferences' to reset all preferences to the default settings.
• We've fixed an issue that caused errors when exporting clips with stills on the last frame.
• We've fixed an issue that added black frames to the end of clips when exporting video back to Hudl Sportscode.

Additional changes

• We've removed the ability to preview calibration lines in clips when tracking is in progress.

Studio v13.1.0

What did we improve?

• The 3D polygon tool is now available in coach mode

Studio v1.12.1

What did we improve?

• First iteration of 3D tracking now available for tactical AFL clips
• Dim clips using the beam tool
• You can now fill 3D data between calibration frames for basketball
• You can now use 3D connected discs in coach mode
• The beam tool is now available in coach mode
• You can now clear all objects in coach mode
• You can now automatically edit objects after adding 2D text and tags
• You're now able to set playlists to 'autoplay' within preferences
• We've improved the visibility of the calibration frame icon
• We've also improved the visibility of the timeline 2D data sections, changing the colour from red to grey
• We've also improved the performance of Studio on Apple Silicon based macs

What did we fix?

• Playback status now sets to "paused" when Studio reaches the last frame of a clip
• Still text added to clips now remains static and no longer wraps

Studio 1.11.0

What did we improve?

• You can now use the 'freehand draw tool' in coach mode
• You can now adjust the speed of clips in coach mode
• You can now restart clips in coach mode

What did we fix?

• You shouldn't see 'camera position' persisting when importing new clips or creating new projects
• We'll now warn you when you're overlapping stills as these can no longer be added to timeline
• You can view accented characters fully in 2d text box
• You can now enable the 'Clear Camera Calibration' once a calibration is loaded
• We have disabled the touchbar when using an iPad
  

Studio v1.10.0

What did we improve?

• Studio now supports drone footage
• Background image can now be added to 2d Text Box
• Improvements to manual calibration
• New pop-up to suggest user adds a calibration on a still when adding a 3D object on a tracked clip with no 3D data
• New shortcut added for a user to access the Clip Settings panel from the Calibration Frame panel

What did we fix?

• Space bar now continues to work as a hotkey for Play/Pause after moving the playhead in Coach Mode
• Removal of 3d data when calibration frame or pause has been deleted within a still
• 3d Objects can now be added to all NTSC video files
• 'Main Camera' angle within clips settings has now been renamed to 'Center Camera'

Studio 1.9.1 Release (Hotfix)

What did we fix?

• Fixed issue in Coach Mode where Next and Previous buttons did not work with playlists from Sportscode while clips play