Skip to main content

Manually Adjust Calibration

Calibration is the process that identifies where the lines are on the pitch prior to adding 3D objects to your clips. Studio can often calibrate automatically, but sometimes the calibration needs to be manually adjusted. This tutorial walks you through how to do that.

  1. Add your clips to Studio, then click 3D Tracking and select Add Calibration Frame.

  2. Click and drag each of the calibration points to the correct position on the pitch.

  3. Repeat step 2 for as many points as needed, then select 3D Tracking > Run 3D Tracking.

  4. Click Close Calibration.

Save yourself time by saving the calibration settings and copying to other clips!