End Zone Setup

Record both your sideline and end zone angle with your HD cameras. 

Step #1
Set Up Your End Zone Router and Bridge 

What you'll need: 

  1. Remove the bottom covers from the end zone router and the bridge router. Plug one end of each ethernet cord into the LAN port on each router. Reattach the covers to protect the connections

  2. Plug the other end of each ethernet cord into the POE port on both power adapters.

  3. Plug the short black ethernet cord into the LAN port on each power adapter. This will create a link between the end zone and bridge routers.

  4. Plug a power cord into each adapter and connect to a power strip (not included).

  5. Plug the power strip into the portable battery. Flip the battery’s AC Output switch to On before pressing the power button.

  6. Use the velcro straps to secure both routers to the pole of your end zone camera. Point them toward your press box router.

Step #2

Split Your Video Feed Between a Monitor and a Streaming Kit

If your end zone camera does not use a monitor, follow the same steps from the Press Box Streaming Kit Setup.

What You'll Need: 

  1. Plug the HDMI cord coming from your camera (the one you normally connect to your end zone monitor) into the HDMI splitter’s INPUT port.

  2. Plug one end of another HDMI cord into OUTPUT 1 on the HDMI splitter. 

  3. Plug the other end of that HDMI cord into your end zone monitor.

  4. Plug the power cord to the HDMI splitter and connect to a power strip (not included).

Step #3

Set Up Your Streaming Kit

What you'll need: 

  1. Take your last HDMI cord and plug one end into OUTPUT 2 on the HDMI splitter.

  2. Plug the other end into the HDMI port on the streaming kit.

  3. Plug the power cord into the streaming kit’s power port and connect to a power strip (not included).