Skip to main content

Set up the Hardware Kit

  1. Fire up the Battery (A).

    Charge battery overnight before every game.

  2. Power on your Streaming Kit (B).

    Wait two minutes for Streaming Kit (B) to fully power on before moving to camera setup.

  3. Power on your end zone camera. Connect the HDMI Cord (not provided) from your camera to the Camera Input Cord (C).

  4. Plug the HDMI Output Cord (D) from the hardware kit in to your end zone monitor. (Skip this step if you do not use an end zone monitor.)

If your streaming kit looks different than the one in the steps above, follow the steps below instead.

  1. Fire up the Battery (A).

    Charge battery overnight before every game.

  2. Check the LED lights on the Streaming Kit (B), they should be on.

  3. Connect your camera to the “HDMI In” port on the Streaming Kit (B) via an HDMI cord (not provided).

  4. Plug the HDMI Output Cord (D) from the hardware kit in to your end zone monitor. (Skip this step if you do not use an end zone monitor.)