End Zone Setup

Record both your side­line and end zone angle with your HD cameras. 

Download the Premium Set Up Manual here.

Step #1
Set Up Your End Zone Router and Bridge 

What you’ll need: 

  1. Remove the bot­tom cov­ers from the end zone router and the bridge router. Plug one end of each eth­er­net cord into the LAN port on each router. Reattach the cov­ers to pro­tect the connections

  2. Plug the oth­er end of each eth­er­net cord into the POE port on both pow­er adapters.

  3. Plug the short black eth­er­net cord into the LAN port on each pow­er adapter. This will cre­ate a link between the end zone and bridge routers.

  4. Plug a pow­er cord into each adapter and con­nect to a pow­er strip (not includ­ed).

  5. Plug the pow­er strip into the portable bat­tery. Flip the battery’s AC Output switch to On before press­ing the pow­er button.

  6. Use the vel­cro straps to secure both routers to the pole of your end zone cam­era. Point them toward your press box router.

Step #2

Split Your Video Feed Between a Monitor and a Streaming Kit

If your end zone cam­era does not use a mon­i­tor, fol­low the same steps from the Press Box Streaming Kit Setup.

What You’ll Need: 

  1. Plug the HDMI cord com­ing from your cam­era (the one you nor­mal­ly con­nect to your end zone mon­i­tor) into the HDMI splitter’s INPUT port.

  2. Plug one end of anoth­er HDMI cord into OUTPUT on the HDMI splitter. 

  3. Plug the oth­er end of that HDMI cord into your end zone monitor.

  4. Plug the pow­er cord to the HDMI split­ter and con­nect to a pow­er strip (not includ­ed).

Step #3

Set Up Your Streaming Kit

What you’ll need: 

  1. Take your last HDMI cord and plug one end into OUTPUT 2 on the HDMI splitter.

  2. Plug the oth­er end into the HDMI port on the stream­ing kit.

  3. Plug the pow­er cord into the stream­ing kit’s pow­er port and con­nect to a pow­er strip (not includ­ed).