Option 2 | Press Box Angle(s)

With this set­up, all hard­ware will be placed in the press box. You’ll record with your exist­ing cam­era in the press box and use an iPad or iPhone to cre­ate and ODK clips. You can also record a sec­ond angle from this iOS device.

Download the Plus Set Up Manual here.

Set Up Your Router in the Press Box

What You’ll Need: 

  1. Remove the cov­er from the bot­tom of the router and plug the orange eth­er­net cord into the Main port. Reattach the cov­er to pro­tect the connection.

  2. Plug the oth­er end of the eth­er­net cord into the POE on the pow­er adapter.

  3. Plug one end of the pow­er cord into the adapter and the oth­er end into the near­est outlet.

    If you don’t have pow­er in the press box, con­nect the pow­er cord to your portable bat­tery. Flip the battery’s AC Output switch to On before press­ing the pow­er button.

  4. Use the pro­vid­ed win­dow mount to attach the router to the out­side of your press box, fac­ing your team’s sideline.

Connect the Streaming Kit to Your Camera

What You’ll Need: 

  1. Plug the large end of the stream­ing kit HDMI cord into your cam­era. You may need to use one of the includ­ed HDMI adapters.

  2. Plug the oth­er end into the stream­ing kit’s HDMI port.

    Do not let the stream­ing kit hang from the cam­era. This could cause the adapter to break.

  3. Apply one side of the adhe­sive vel­cro to the back of the stream­ing kit and the oth­er to your tri­pod. Secure your stream­ing kit to the tri­pod to pre­vent it from hang­ing freely.

  4. Plug the small end of the USB pow­er cord into the stream­ing kit’s pow­er port and the large end into the portable battery.