Skip to main content

Connect Flex to a Network

Connecting your Flex camera to a 4G network, Wi-Fi or hotspot enables automatic uploading of recordings and the ability to livestream your match without the need for an ethernet connection.

Follow the steps below to connect to a 4G network, Wi-Fi or hotspot to livestream and upload in real-time, or upload past recordings.

Livestream and Upload in Real-time

  1. Open the Focus app and tap the Camera Status tab.

  2. Tap Not Connected under Network Connection.

  3. The network connection flow will automatically open allowing you to connect to an external network, select the available Wi-Fi, hotspot or 4G network of your choice.

  4. Enter the password if necessary, then tap Connect to Wi-Fi.

    When connecting to a Wi-Fi network it's possible your device will disconnect from the Flex camera, if this happens tap Reconnect to Flex then Join on the prompt that appears.

  5. With a successful network connection, you'll see that you're connected from the Camera Status tab.

  6. After connecting to a network, Focus Flex will automatically reconnect to this network when it is in range. To change which network your device is connected to, open the Wi-Fi connection flow from the Camera Status Tab.

Upload Past Recordings

  1. Open the Focus app and tap the Recordings tab.

  2. Select Connect Flex to Wi-Fi Network.

  3. The network connection flow will automatically open allowing you to connect to an external network, select the available Wi-Fi, hot spot or 4G network of your choice.

  4. Enter the password if necessary, then tap Connect to Wi-Fi.

    When connecting to a network it's possible your device will disconnect from the Flex camera, if this happens tap Reconnect to Flex then Join on the prompt that appears.

  5. With a successful network connection, you'll see that you're connected from the Camera Status tab.

  6. After connecting to a network, Focus Flex will automatically reconnect to this network when it is in range. To change which network your device is connected to, open the Wi-Fi connection flow from the Camera Status Tab.